water

Ebara Pumps - DLKFU Series

Submersible cast iron wastewater, sewage pump

K-Series: Model DLKFU

The Ebara K-series design features address the most common reasons for clogging caused by fibrous materials.

Ebara DLKF series pumps are designed to tackle clogging challenges. The Ebara K-series submersible sewage pump maintains the same quality and durability of the Ebara DLF line but with enhanced passage capabilities for handling of fibrous waste.


Specifications

  • Discharge Size: 2″ to 12″
  • Range of HP: to 60 HP
  • Capacity: to 4000 GPM
  • Head: 7 to 243 Ft.
  • Max. solid diameter: 3 1/4″
  • Max. liquid temperature: 104°F (40°C)
  • FM explosion proof available

Key Features

  • Reduces material caught on the vane tips
  • Increases inlet pressure which keeps debris moving instead of recirculating
  • E-liminator groove disrupts the accumulation of fibrous debris

Applications

  • Industrial
  • Municipal
  • Water
  • Wastewater

DSU - DSHU by Ebara Pumps

Submersible cast iron sump pumps

Model DSU, DSHU Series

The model DSU, DSHU submersible pumps are constructed of rugged cast iron suitable for sump and drainage pumps applications. The model DSHU pumps can handle hot water applications up to 176°F.


Specifications Pumps

  • Pumps Discharge Size: 2″, 3″, 4″
  • Range Pumps of HP: 1/2 to 10 HP
  • Pumps Capacity: 8 to 390 GPM
  • Pumps Head: 8 to 126 Feet
  • Max. liquid temperature:
    • 122°F/50°C (Model DSU)
    • 158°F/70°C (Model DSHU 1/2, 1 HP )
    • 176°F/80°C (ModelDSHU 2 to 5 HP)
    • 200°F/93°C (ModelDSHU limited to 10 minutes)

Key Features Pumps

  • Air-filled, heavy-duty motor rated for 20 starts/hour – operates cooler with higher efficiencies
  • Built-in autocut motor protection – protects against overheat, out of phase, single phasing, and no load
  • 60,000 hour bearings – long dependable operation, lower maintenance costs
  • Semi-open impellers – best design for handling stringy and abrasive materials providing durability and longer life
  • Double mechanical seals – operate in an oil bath providing longer service life and lower maintenance costs
  • Stainless steel shaft – high tensile strength and corrosion resistance
  • Small and lightweight – easy to transport for temporary installations
  • Accessories – Cast iron discharge elbow available for 3 to 5 HP models; optional QDC system available

Applications Pumps

  • Water
  • Dewatering
  • Drainage
  • Effluent
  • Hot Water

EFQU, EFQT Series - Ebara Pumps

Self-priming trash pumps

Model EFQU, EFQT Pumps

EBARA EFQ series pumps are available in a wide range of materials and sizes to handle solids and light slurries efficiently and effectively. The EFQ trash pumps features a large volute that allows for quick priming even with the casing only partially filled and an open suction line. Pumps Easy to install in various mounting configurations including flex-coupled and horizontal or vertical V-belt, the EFQ series work in a wide range of commercial, municipal and industrial water, wastewater and sewage applications Pumps.


Specifications Pumps

  • Pumps Discharge Size: 2 to 12 inch
  • Range of HP: to 125 HP
  • Pumps Capacity: to 3400 GPM
  • Head: to 210 Ft.
  • Pumps Max. solid diameter: 3″

Key Features Pumps

  • Large solids handling capabilities prevents clogging – 3″ solids handling (EFQT), 1.25″ solids (EFQU)
  • Robust cast iron casing with ductile iron impeller standard
  • Easy maintenance – Removable cover plates and rotating elements for quick inspection and cleaning of the pump without having to detach from the piping
  • Backside pump-out vanes reduce pressure on the seal and exclude solids from the seal area
  • Multi-vane, semi-open, high efficiency impellers
  • External shimless wear plate adjustment
  • Easy removal cover plates and rotating element
  • Cartridge Seals with Silicon Carbide/Silicon Carbide faces; design allows for quick replacement and ease of installation
  • Alternate construction materials available on request including 304SS, 316SS and CD4 MCU
  • Diesel engine operation, trailer or skid mounted

Applications Pumps

  • Water
  • Wastewater
  • Sewage
  • Slurry
  • Irrigation
  • Dewatering

Ebara Pump - Stainless steel end suction centrifugal 'Model 3U or 3UB'

The model 3U, 3UB end suction centrifugal pump are constructed of bulge formed stainless steel and designed for corrosion resistance, dependable performance and rugged continuous duty. The 3UB-65 models extend the hydraulic performance range of the 3U series to 750 GPM with trimmable bronze impellers available.

Constructed of bulge-formed stainless steel, model 3U, 3UB end suction centrifugal pumps are designed for corrosion resistance, dependable performance and high-efficiency, continuous duty. High quality stainless steel components are stronger, dimensionally consistent and lighter weight compared to conventional cast iron, making EBARA centrifugal pumps competitively priced and an economical advantageous choice. The model 3U, 3UB series are suitable for almost any commercial and industrial general water applications that require corrosion resistance including those with moderately aggressive liquids.

NSF/ANSI 61 Annex G listed


Specifications

  • Suction Size: 2″ to 3″
  • Discharge Size: 1 1/4″ to 2 1/2″
  • Range of HP: 3 to 30 HP
  • Capacity: 13 to 650 GPM
  • Head: 33 to 250 Ft.
  • Max. working pressure: 230 PSI (15 Bar)
  • Temperature: 212°F (100°C); Max. temperature 250°F (121°C) with optional high temperature seal
  • Liquid: clean water

Key Features

  • Close coupled design – saves space; simplifies maintenance and installation
  • Stainless steel liquid end components – high quality; corrosion resistance
  • Versatile mounting – can be installed horizontally or vertically
  • Back pullout construction – assembly and overhaul of the impeller and seal without distorting suction and discharge connections
  • Top centerline discharge and foot support under casing – ensures self-venting and reduces misalignment from pipe loads
  • High-efficiency – lowers operating costs
  • High quality mechanical shaft seals and o-rings – available for standard pumping requirements, or optional high temperature and chemical duty operation
  • Available as a complete pump or as a kit

Applications

  • Plant services
  • Water supply systems
  • Liquid transfer
  • Ultrapure water systems
  • Water reclamation
  • Water treatment
  • Temperature Control
  • Air conditioning systems

Ground Water

Ground Water is typically between 25 and 10,000 years old. Before it  reaches the aquifer, it has been filtered and exposed to biological treatment on its way through various layers of the ground. Groundwater is therefore  usually of high quality and requires little or no treatment before its consume.