tsurumi pumps

Tsurumi Pumps - SFQ Series

SFQ Series By Tsurumi Pumps

Tsurumi Pumps corrosion resistant pumps are available in 316 or 304 stainless steel (SFQ Series, SQ Series) as well as titanium (TM Series). Featuring semi-vortex, vortex, and semi-open impellers, our solidly engineered pumps can endure the corrosive forces of your toughest applications.

Performance Range Of Tsurumi Pumps

SFQ Series

 

Model Tsurumi Pumps Discharge Bore (in.) Phase Motor Output (HP) Pole Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
100SFQ211 4 Three 15 2-3600 440 25 33 1/4 315
100SFQ25.5 4 Three 7.5 2-3600 440 25 33 1/4 273
100SFQ27.5 4 Three 10 2-3600 440 23 3/8 31 3/8 271
50SFQ2.75 2 Three 1 2-3600 440 9 15/16 15 5/8 49
80SFQ21.5 3 Three 2 2-3600 208/230/460/575 12 15/16 17 1/8
80SFQ23.7 3 Three 5 2-3600 208/230/460/575 14 1/8 21 3/4

Tsurumi Submersible Pumps - NK Series

NK Series, Tsurumi Submersible Pumps

Heavy duty, high head single-phase pumps available in 110v or 220v. Optional agitator kits allow continuous duty when pumping abrasive materials.

NK2-15

Tsurumi Submersible Pumps – NK Series Features

Synthetic Rubber Wear Parts for maximum durability and pump performance.

Continuous duty air-filled motor

Ductible iron semi-vortex impeller

Dual voltage available on NK2-15 model

OPTIONAL ACCESSORIES
TS-303 Float Switch for
automatic operation (220V only).

Agitator kit to suspend solids and
prevent clogging.

2-inch NPT coupling available.

NK2-22L

Tsurumi Submersible Pumps – NK Series Features

Tsurumi Submersible Pumps NK2-22L Features:

New high volume NK2-22L series pump produces 35% more volume than our standard NK2-22 series. Available in 220v single-phase only.

Performance Range Of Tsurumi Submersible Pumps

NK Series

 

Model Discharge Size (in.) Motor Output (HP) Voltage (V) Cable Length (ft.) Diameter (in.) Height (in.) Weight (lbs.)
NK2-15 3 2 110 or 220 32 9 7/16 24 1/2 63.5
NK2-22 3 3 220 32 9 7/16 24 1/2 64
NK2-22L 3 3 220 32 9 1/4 26 1/2 88

Tsurumi Pumps - Utility Series

Utility Series by Tsurumi Pumps

Tsurumi Pumps Not every project needs a large pump, yet the application may call for a quality of pump a few grades higher than what’s found in retail stores. In order to satisfy your customers, turn to Tsurumi Tsurumi Pumps line of contractor ready utility pumps.

L4000

Tsurumi Pumps Utility Series Features

L4000 Series DC Pump:
12 volt DC pump.

1.5″ and 2″ discharge ports.


Liquid cooled motor.


Double ball bearing.


12 pole motor.


Built in check valve.

F-13

Tsurumi Pumps Utility Series Features

F-13 Utility Pump:
Air-filled motor.

Built in float switch for automatic or manual operation.

1.25″ discharge with garden hose adapter.

With an air filled motor, this lightweight pump is suitable for all your general dewatering applications whether it be draining the children’s pool, or removing access water from the basement floor. There’s a built in float switch allowing you to operate the pump automatically or manually depending on the situation.

Tsurumi Pumps Performance Range

 

Utility Series

 

Model Discharge Size (in.) Motor Output (HP) Voltage (V) Cable Length (ft.) Diameter (in.) Height (in.) Weight (lbs.)
F-13 1 1/4 in. 1/4 hp (nominal) 115V 10 ft. 6.6 lbs.
L4000 1 1/2 or 2 in. 12V 6 ft. 5.4 lbs.

Tsurumi Pumps VANCS Series

Tsurumi Pumps VANCS Series

Our VANCS series of Tsurumi pumps offer automatic or manual operation and feature the most advanced material composition available in Tsurumi Pumps submersible pumps.

PN

VANCS Series Tsurumi Pumps Features

Watertight Cable Entrance with Anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous duty Tsurumi Pumps air filled copper wound highly efficient motor.

Corrosion Resistant Stainless Steel Motor Casing.

Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces.

Ball type air Relief valve

Solids handling semi-vortex impeller

Tsurumi Pumps Available Automatic Operation (PNA) / Auto Alternating (PNW)

PU Series

VANCS Series Tsurumi Pumps Features

Watertight Cable Entrance Tsurumi Pumps with Anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous duty Tsurumi Pumps air filled copper wound highly efficient motor.

Corrosion Resistant Tsurumi Pumps Stainless Steel Motor Casing

Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces.

Ball type air Relief valve

Solids handling semi-vortex impeller

32Ft power cord

Tsurumi Pumps Available in Automatic Operation (PUA) / Auto Alternating (PUW)

PSF Series

VANCS Series Tsurumi Pumps Features

Watertight Cable Entrance with Anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous Tsurumi Pumps duty air filled copper wound highly efficient motor.

Corrosion Resistant Stainless Steel Motor Casing

Dual inside mechanical Tsurumi Pumps with Silicon Carbide vs. Ceramic bottom faces.

Ball type air Relief valve

Solids handling semi-vortex impeller

32Ft power cord

Tsurumi Pumps Available in Automatic Operation (PSFA) / Auto Alternating (PSFW)

VANCS Series

VANCS Series Tsurumi Pumps Features

Watertight Cable Entrance with
anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous duty Tsurumi Pumps air filled copper wound highly efficient motor.

Corrosion Resistant Stainless Steel Motor Casing

Dual inside mechanical Tsurumi Pumps with Silicon Carbide vs. Ceramic bottom faces.

Ball type air Relief valve

Solids handling semi-vortex impeller

32Ft power cord


Performance Range Tsurumi Pumps

 

VANCS Series

 

Tsurumi Pumps Series Model Tsurumi Pumps Discharge Size (in.) Phase Motor Output (HP) Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
PN 50PN2.25 2 Three 1/3 230/460 9 5/8 14 15/16 16
PN 50PN2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 17
PN 50PN2.4 2 Three 1/2 230/460 9 5/8 15 1/4 18
PN 50PN2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 19
PN 50PN2.75 2 Three 1 230/460 9 5/8 15 7/8 22
PN 50PN2.75S 2 Single 1 115/230 9 5/8 15 7/8 24
PN 80PN21.5 3 Three 2 230/460 11 5/8 17 1/8 35
PN 80PN22.2 3 Three 3 208-220/460/575 8 3/8 22 49
PN 80PN23.7 3 Three 5 208-220/460/575 8 3/8 23 3/8 60
PNA 80PNA22.2 3 Three 3 208-220/460/575 8 3/8 28 1/4 51
PNA 80PNA23.7 3 Three 5 208-220/460/575 8 3/8 29 5/8 62
PNW 80PNW22.2 3 Three 3 208-220/460/575 8 3/8 28 1/4 51
PNW 80PNW23.7 3 Three 5 208-220/460/575 8 3/8 29 5/8 62
PSF 50PSF2.25 2 Three 1/3 230/460 9 5/8 14 15/16 16
PSF 50PSF2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 17
PSF 50PSF2.4 2 Three 1/2 230/460 9 5/8 15 1/4 18
PSF 50PSF2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 19
PSF 50PSF2.75 2 Three 1 230/460 9 5/8 15 7/8 21
PSF 50PSF2.75S 2 Single 115/230 9 5/8 15 7/8 15 7/8 24
PSF 80PSF21.5 3 Three 2 230/460 11 5/8 17 1/8 35
PSFA 80PSFA21.5 3 Three 2 208-220/440 7 11/16 24 1/2 37
PSFW 80PSFW21.5 3 Three 2 208-220/440 7 11/16 22 1/2 37
PU 50PU2.15 2 Three 1/5 230/460 8 7/8 14 7/8 15
PU 50PU2.15S 2 Single 1/5 115/230 8 7/8 14 7/8 15
PU 50PU2.25 2 Three 1/3 230/460 9 5/8 14 15/16 16
PU 50PU2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 17
PU 50PU2.4 2 Three 1/2 230/460 9 5/8 15 1/4 17
PU 50PU2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 19
PU 50PU2.75 2 Three 1 230/460 9 5/8 15 7/8 21
PU 50PU2.75S 2 Single 1 115/230 9 5/8 15 7/8 24
PU 80PU21.5 3 Three 2 230/460 11 5/8 18 11/16 35
PU 80PU22.2 3 Three 3 208-220/460/575 8 3/8 22 15/16 49
PU 80PU23.7 3 Three 5 208-220/460/575 8 3/8 24 5/16 60
PUA 80PUA22.2 3 Three 3 208-220/460/575 8 3/8 31 1/8 51
PUA 80PUA23.7 3 Three 5 208-220/460/575 8 3/8 32 1/2 62
PUW 80PUW22.2 3 Three 3 208-220/460/575 8 3/8 29 1/8 51
PUW 80PUW23.7 3 Three 5 208-220/460/575 8 3/8 30 1/2 62
TM 50TM2.25 2 Three 1/3 230/460 15 9 5/8 14 15/16
TM 50TM2.25S 2 Single 1/3 115/230 16 9 5/8 14 15/16
TM 50TM2.4 2 Three 1/2 230/460 16 9 5/8 15 1/4
TM 50TM2.4S 2 Single 1/2 115/230 17 9 5/8 15 1/4
TM 50TM2.75(S) 2 Single 1 115/230 20 9 5/8 15 7/8
TM 80TM21.5 3 Three 2 208-220/440 33 7 11/16 17 1/8
TM 80TM22.2 3 Three 3 208-220/460/575 46 8 3/8 22
TM 80TM23.7 3 Three 5 208-220/460/575 57 8 3/8 23 3/8
TMA 50TMA2.25 2 Three 1/3 230/460 16 9 5/8 14 15/16
TMA 50TMA2.25S 2 Single 1/3 115/230 17 9 5/8 14 15/16
TMA 50TMA2.4 2 Three 1/2 230/460 17 9 5/8 15 1/4
TMA 50TMA2.4S 2 Single 1/2 115/230 19 9 5/8 15 1/4
TMA 50TMA2.75(S) 2 Single 1 115/230 21 9 5/8 15 7/8
TMA 80TMA21.5 3 Three 2 208-220/440 34 7 11/16 24 1/2
TMA 80TMA22.2 3 Three 3 208-220/460/575 48 8 3/8 30 1/4
TMA 80TMA23.7 3 Three 5 208-220/460/575 59 8 3/8 31 1/2

Tsurumi - UEF / UT Series

Tsurumi Pumps UEF/UT Series

The Tsurumi UEF pump features a vortex impeller and wide passage, making it ideal for pumping liquids containing fibrous foreign matter.  The UT pump is a compact economical cast iron pump, which has a large passage that makes it ideal for liquid containing various solids.

UEF Series

Tsurumi UEF/UT Series Features

UEF Series:

Vortex impeller

Built-in thermal protector

Air-filled motor rated for continuous duty

Ideal for tank transfer at small scale treatment facilities

Cast iron construction

Single-phase operation

Optional float switches available

Tsurumi UT Series:

Economical – the UT / UTZ Series is an economical version of the Tsurumi U Series, semi-vortex submersible pumps.  It is designed for a wide range ofapplications.

Large Diameter Passage – The pumo has a large passage that makes it ideal fr liquid containing various solids.

Available in Automatic Operation – Automatic version equipped wtih floats.  (50UTZ2.4S and 50UTZ2.75S)

Tsurumi Performance Range

 

UEF/UT Series

 

Model Tsurumi Discharge Size (in.) Phase Motor Output (HP) Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
50UEF2.4S 2 Single 1/2 115/220 9 1/2 13 33
50UT2.4S 2 Single 1/2 115/220 9 1/2 13 3/4 31
50UT2.75S 2 Single 1 115/220 9 1/2 16 37
50UTZ2.4S 2 Single 1/2 115/220 9 1/2 15 3/4 31
50UTZ2.75S 2 Single 1 115/220 9 1/2 18 37
You might also likeclose