ebara pumps

Ebara - End Suction Pumps

ebara-pumps-end-suctionEnd Suction Volute Pump.
Features:

  •  Easy Confirm to JIS Standard JIS B8313 with 2 pole and 4 pole choice.
  • BPO (Back Pull Out) Type can be dissembled and inspected without removing the suction and discharge piping.
  • Top centerline discharge, foot support under casing for maximum resistance to misalignment and distortion from pipe loads.

 

Application:

  • General Water supply
  • Hot and cold water circulation
  • Irrigation
  • Industrial Water

Ebara Pumps FSSA Series

FSSA Series

Features Of Ebara Pumps

  • Ebara Pumps portion contacting liquid is made of high grade stainless steel.
  • BPO (Back Pull Out) feature allows all rotating elements to be removed without disconnecting suction and discharge pipework.
  • Top centerline dicharge, foot support under casing for maximum resistance to misalignment and distortion from pipe loads.
  • Non-overload design to ensure stable performances for all application
  • Compact construction, aplicable for two-poles high speed motor provides a compact unit and minimizes installation area.
  • Wide range application due to 316 stainless steel material.

Applications Of Ebara Pumps

  • Industrial use
  • Chemical solutions
  • Industrial drainage
  • Hot and cold water supply
  • Sea water

Material Of Ebara Pumps

  • Casing SCS-14 Stainless steel, Impeller SCS-14 Stainless steel, Shaft 316 Stainless steel, Casing O-ring Fluolorubber (viton); optional Teflon (PTFE), Seal Teflon (PTFE); optional Mechacnical seal SiC/SiC.

 

Ebara Pumps DL - Submersible Sewage Pumps

EBARA Pumps DL-DL W/C Submersible

SUBMERSIBLE SEWAGE PUMPS ( DL ) WITH CUTTER (DL W/C)
in cast iron
Submersible sewage pumps ( DL ) with cutter (DL W/C) in cast iron

APPLICATIONS Ebara Pumps DL

• Ideal for waste water applications containing soft or fibrous solids
• Industrial waste water drainage

TECHNICAL DETAILS Ebara Pumps DL
• Non-Clog single-channel, open double-channel, no clog semi open impeller prevents
clogging by fibrous matter
• Range of models from 65 to 300 mm discharge size and power
up to 45 kW (DL)

Ebara Pumps DL TECHNICAL DATA
• Maximum temperature of the liquid: 40°C
• Max solids size for passage: 46 mm (65DL, 65DL W/C)
46 mm (80DL, all DLC, 80 DL W/C)
57 mm (100DL, 100DLB, 100DLW/C,
100DLB W/C)
68 mm (150DL up to 22kW)
73 mm (200DL up to 22kW)
76 mm (all models 30÷45 kW)
79 mm (250DL up to 22kW)
88 mm (300DL up to 22kW)
• Max fibers lenght: 195mm (65DL, 65DLW/C)
240mm (80DL, all DLC, 80DLW/C)
300mm (100DL, 100DLB, 100DLW/C)
400mm (150DL from 5,5 up to 45kW)
500mm (200DL up to 45kW)
550mm (250DL up to 45kW)
600mm (300DL up to 45kW)
• Flanges: DN65, DN80, DN100, DN150, DN200, DN250, DN300 (DL)
DN65, DN80, DN100 (DLW/C)

MOTOR Ebara Pumps DL TECHNICAL DATA

• Air filled dry submersible 4 poles motor
• Insulation class F
• Degree protection IP68
• 380-415±10%, 50Hz (1,5÷7,5kW) (DL and DLW/C) threephase voltage
400-415±10%, 50Hz ( ∆connection11÷2kW) (DL) threephase voltage
380-415±10%, 50Hz (∆connection 30÷45kW) (DL) threephase voltage
• Power up to 45 kW (DL)
up to 7.5kW (DLW/C)

Ebara Pumps DL MATERIALS
• Pump casing, impeller with
cutter (DLW/C), vitex impeller (DLC and DLB) , elbow in cast iron
• Shaft in AISI 403
• Mechanical seal: SiC/SiC/NBR (pump side)
Carbon/Ceramic/NBR (motor side)

Submersible stainless steel pump - Ebara Pump

Ebara Pump Submersible stainless steel pump, effluent

Model DWU – “Dominator”

The EBARA Pump Model DWU “Dominator” sewage pumps are designed for reliable pumping of wastewater with suspended solids up to 2″ in diameter. The EBARA Pump Dominator is superior in dependability and efficiency. High-quality stainless steel components are stronger, dimensionally consistent and lighter weight compared to conventional cast iron parts. Stainless steel construction is ideal for residential, commercial and industrial applications. Double mechanical seals are a standard feature that ensure long life.

Model Ebara Pump DW(A)(F)U, DWX(A)(F)U is CSA certified (3HP excluded).


Specifications Ebara Pump

  • Discharge Size: 2″ (NPT or ANSI Flanged)
  • Range of HP: 1/2 to 3 HP
  • Capacity: 8 to 235 GPM
  • Head: 8 to 74 Ft.
  • Max. liquid temperature: 104°F (40°C)
  • Max. solid diameter: 2″
  • Available in single or three phase models; manual or automatic operation

Key Features Ebara Pump

  • Constructed of high-quality, corrosion resistant 304 stainless steel
  • Motor is 2 pole submersible, rated continuous duty
  • 104°F maximum fluid temperature continuous operation, fully submerged; 140° F intermittent operation
  • Automatic float switch
  • NPT thread discharge or 150 lb ANSI flange
  • Double mechanical seal with viton elastomers
  • Shielded, pre-lubricated ball bearings
  • Single channel and vortex impellers
  • Thermal overload protection
  • QDC system available as an optional accessory

Ebara Pump Applications

  • Wastewater with suspended solids
  • Residential
  • Commercial
  • Industrial
  • Fountains, water displays
  • Containment transfer
  • Irrigation
  • Drainage
  • Emptying (pools, water storage structures)

Ebara Pumps - FSDA 50Hz & 60Hz

Features Ebara Pumps
  • Motor closed couple, alignment free construction.
  • Easy maintenance, BPO (Back Pull Out) feature allows all rotating elements to be removed without disconnecting suction and discharge pipework.
  • Top centreline discharge, foot support under casing for maximum resistance to misalignment and distortion from pipe loads.
  • Higher operating efficiency over a wider range of capacities, lowers operational cost.
  • Very compact design for ease of installation and permits minimum maintenance.

 

Applications Ebara Pumps
  • Water supply
  • Hot and cold water circulation
  • For cooling tower
  • Fire-fighting application
  • Irrigation
  • Industrial use
  • Drainage
  • Sprinkling
  • Air-conditioning
  • For swimming pool
  • Brine
  • Oils

 

Material Ebara Pumps
  • Casing cast iron, Impeller bronze, Bracket cast iron, Shaft 316 satinless steel, Mechacnical seal ceramic vs carbon.

 

EBARA Pumps EPD and Optima PRO Drainer

Ebara Pumps Submersible stainless steel sump, drainage

Model EPD, Optima – “PRO Drainer™”

EBARA’s Model EPD and Optima “PRO Drainer™” are a complete solution for the pumping of slurry or semi-dirty water. Manufactured of high quality, corrosive resistant 304 stainless steel components, the PRO Drainer series are lighter weight compared to conventional cast iron pumps. This efficient, versatile and reliable pump is available in fractional horsepowers and suited for many industrial, commercial, residential and agricultural liquid applications and ideal for fixed or portable installations.

Model EBARA Pumps EPD is UL and CSA listed. Model Optima UL certified.


Specifications EBARA Pumps

  • Discharge Size: 1 1/4″ to 1 1/2″
  • Range of HP: 1/3 to 1 1/2 HP
  • Capacity: to 86 GPM
  • Head: to 61 Ft.
  • Max. solid diameter: 3/8″
  • Max. liquid temperature: 122°F/50°C (140°F/60°C intermittent duty)
  • Available in single and three phase models; manual or automatic operation

Key Features EBARA Pumps

  • Constructed of high quality, corrosion resistant 304 stainless steel (Note: Optima has Noryl impeller)
  • Oil lubricated double mechanical shaft seal
  • Air filled, continuous duty motors rated for up to 20 starts per hour
  • Built-in thermal protection with automatic reset
  • Built to operate with full or partial submergence (Optima pumps are available with an optional Low Suction Device)
  • Vertical discharge allows pumpage to carry heat away from the motor

Applications EBARA Pumps

  • EBARA Pumps Drainage (basements, sumps, excavation)
  • Seepage (residential, commercial, industrial)
  • Effluent and containment transfer
  • Emptying (pools, water storage structures)
  • Wastewater (from trays, wet bars, washing machines)
  • Decorative fountains
  • Irrigation
  • Mound systems, leach fields
  • Dewatering (move water/effluent to sewage systems)

SQPB - Ebara Self Priming Pumps

APPLICATIONS

• Irrigation
• Drainage
• General purpose

FEATURES

• No priming is required except for initial use
• Special design of casing provides very rapid priming for extended piping
• Maintenance is facilitated due to packing type
• Water mixed with a little sand or mud can be pumped up due to semi-open impeller design
• Easy installation with engine for belt driven due to cc

sqpb_self_priming_pumps

SPECIFICATIONS 

Liquid : River water and Fresh water (Optional : Sea Water)
Temperature : 0 – 40 C
Rotation : Counter clock wise when viewed from drive end
Installation : Outdoors
Material;
- Casing : Cast Iron (Optional : Bronze)
- Impeller : Cast Iron (Optional : Bronze)
- Shaft : Carbon Steel (Optional : Stainless Steel)
Contruction;
- Impeller : Semi Open
- Stuffing Box : Packing
- Bearing : Sealed Ball Bearing
Accessories : Strainer, Discharge Elbow, Hose Clamp, suction Hose Nipple,
Standard V – Pulley

Ebara Pumps - End Suction DWO Series

Stainless steel open impeller centrifugal pumps

Model DWO

The model DWO open impeller end suction pumps are constructed of bulge formed stainless steel and designed for corrosion resistance, dependable performance pumps and high-efficiency, continuous duty. High-quality stainless steel components are stronger, dimensionally consistent and lighter weight compared to conventional cast iron, making EBARA centrifugal pumps competitively priced and an economical, advantageous choice. The model DWO Pumps is suitable for applications with suspended solids including food and beverage processing, dirty liquid handling and other plant

services

such as industrial washing machine water.


Specifications Pumps

  • Pumps Suction Size: 2 to 2 1/2″ NPT (female) thread
  • Pumps Discharge Size: 2″ NPT (female) thread
  • Range Pumps of HP: 1 1/2 to 4 HP
  • Capacity Pumps: to 250 GPM
  • Head Pumps: 35 to 65 Ft.
  • Max. working pressure: 116 PSI (8 Bar)
  • Temperature: 194°F (90°C)
  • Liquid: suitable for suspended 3/4″ spherical solids in semi-dirty water

Key Features Pumps

  • Open impeller – suitable for suspended solids in liquid and dirty water; solids handling to 3/4″ (spherical)
  • Close coupled design – saves space; simplifies maintenance and installation
  • Stainless steel liquid end components – high quality; corrosion resistance; NPT threaded connections, hose barb connections
  • Back pullout construction – assembly and overhaul of the impeller and seal without distorting suction and discharge pumps connections
  • Top centerline discharge and foot support under casing – ensures self-venting and reduces misalignment from pipe loads
  • High operating efficiency – lowers operating costs
  • High quality mechanical shaft seals and o-rings – available for standard pumping requirements, or optional high temperature and chemical duty operation.
  • TEFC motors, IEC motors manufactured by EBARA Corporation

Applications Pumps

  • Food process
  • Beverage process
  • Dirty liquid handling
  • OEM equipment application
  • Water reclamation
  • Water treatment
  • Plant services

DWP, DWPM Series - Ebara Pumps

Submersible dewatering pumps

Model DWP, DWPM Pumps

Portable, slim-line top discharge submersible dewatering pumps are capable of handling contaminated fluids in the most severe and corrosive applications at construction sites, mines, power stations, steel plants, on ships and in aquaculture. The model DWP/DWPM pumps are available in either standard cast iron or 316 stainless steel. The high head models feature heavy-duty motors with oversized shaft and bearings.


Specifications Pumps

  • Discharge Pumps Size: 2″, 3″, 4″, 6″, 8″
  • Range of HP: 1.3 to 58 HP
  • Capacity Pumps: 30 to 2000 GPM
  • Head Pumps: 5 to 340 Ft.
  • Max. liquid temperature: 104°F/40°C

Key Features Pumps

  • Heavy-duty motor
    • Oversized shaft and bearings
    • Available in most voltage / frequency combinations
    • 2-pole induction type continuous rated with squirrel cage rotor, Class H insulation
    • Maximum 15 starts per hour
  • Tandem UPPER & LOWER mechanical seals are tungsten carbide/tungsten carbide and operate enclosed in a pressure compensated oil chamber
  • Unique SAND GUARD seal housing prevents sand and debris from collecting on outer seal face during pumps operation
  • Two single row, deep groove ball bearings enclosed with high temperature grease-containing special anti-corrosion additive
  • Standard impeller is nitride hardened 410 stainless steel to 56HRC; optional 316SS impeller available
  • Stainless steel shaft, strainer, hardware and outlet for maximum corrosion resistance
  • Water and oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible 50 ft. power cable
  • Field adjustable rubber lined diffuser and wear plates provide for optimum pumps efficiency

Applications Pumps

  • Construction
  • Mining
  • Power stations
  • Steel mills
  • Aquaculture

Model 2CDXU, 2CDU

Stainless steel two-stage end suction centrifugal pumps

The model 2CDXU, 2CDU two-stage, end suction pumps are constructed of bulge formed stainless steel and designed for corrosion resistance, dependable performance and high-efficiency, continuous duty. High-quality stainless steel components are stronger, dimensionally consistent and lighter weight compared to conventional cast iron, making EBARA centrifugal pumps competitively priced and an economical advantageous choice. Models 2CDXU, 2CDU Pumps are suitable for commercial and industrial pressure boosting and general water applications including water supply, water treatment, irrigation and in air conditioning systems.

Model 2CDU is NSF/ANSI 61 Annex G listed


Specifications Pumps

  • Suction Pumps Size: 1 1/4″ to 1 1/2″ NPT thread
  • Discharge Pumps Size: 1″ NPT thread
  • Range of HP: 2 to 5 HP
  • Capacity Pumps: 5.5 to 66 GPM
  • Head Pumps: 98 to 245 Ft.
  • Max. working pressure: 125 PSI (9 Bar)
  • Temperature: 212°F (100°C)
  • Liquid: clean water

Key Features Pumps

  • Close coupled design Pumps- saves space; simplifies maintenance and installation
  • Stainless steel liquid end components- high quality; corrosion resistance
  • Versatile mounting- can be installed vertically or horizontally
  • Back pullout construction- assembly and overhaul of the impeller and seal without distorting suction and discharge connections
  • Top centerline discharge and foot support under casing- ensures self-venting and reduces misalignment from pipe loads
  • High operating efficiency- lowers operating costs
  • High quality mechanical shaft seals and o-rings Pumps- available for standard pumping requirements, or optional high temperature and chemical duty operation.
  • Available with IP55 TEFC motors (2CDXU) or Standard NEMA motor (2CDU)

Applications Pumps

  • Pressure boosting pumps
  • Plant services
  • Water supply systems
  • Liquid transfer
  • Ultrapure water systems
  • Pharmaceutical services
  • Reverse osmosis
  • Water reclamation
  • Water treatment
  • OEM equipment application
Pages:12Next »
You might also likeclose