Wastewater Pumps

Tsurumi Pumps - Utility Series

Utility Series by Tsurumi Pumps

Tsurumi Pumps Not every project needs a large pump, yet the application may call for a quality of pump a few grades higher than what’s found in retail stores. In order to satisfy your customers, turn to Tsurumi Tsurumi Pumps line of contractor ready utility pumps.

L4000

Tsurumi Pumps Utility Series Features

L4000 Series DC Pump:
12 volt DC pump.

1.5″ and 2″ discharge ports.


Liquid cooled motor.


Double ball bearing.


12 pole motor.


Built in check valve.

F-13

Tsurumi Pumps Utility Series Features

F-13 Utility Pump:
Air-filled motor.

Built in float switch for automatic or manual operation.

1.25″ discharge with garden hose adapter.

With an air filled motor, this lightweight pump is suitable for all your general dewatering applications whether it be draining the children’s pool, or removing access water from the basement floor. There’s a built in float switch allowing you to operate the pump automatically or manually depending on the situation.

Tsurumi Pumps Performance Range

 

Utility Series

 

Model Discharge Size (in.) Motor Output (HP) Voltage (V) Cable Length (ft.) Diameter (in.) Height (in.) Weight (lbs.)
F-13 1 1/4 in. 1/4 hp (nominal) 115V 10 ft. 6.6 lbs.
L4000 1 1/2 or 2 in. 12V 6 ft. 5.4 lbs.

Tsurumi Pumps VANCS Series

Tsurumi Pumps VANCS Series

Our VANCS series of Tsurumi pumps offer automatic or manual operation and feature the most advanced material composition available in Tsurumi Pumps submersible pumps.

PN

VANCS Series Tsurumi Pumps Features

Watertight Cable Entrance with Anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous duty Tsurumi Pumps air filled copper wound highly efficient motor.

Corrosion Resistant Stainless Steel Motor Casing.

Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces.

Ball type air Relief valve

Solids handling semi-vortex impeller

Tsurumi Pumps Available Automatic Operation (PNA) / Auto Alternating (PNW)

PU Series

VANCS Series Tsurumi Pumps Features

Watertight Cable Entrance Tsurumi Pumps with Anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous duty Tsurumi Pumps air filled copper wound highly efficient motor.

Corrosion Resistant Tsurumi Pumps Stainless Steel Motor Casing

Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces.

Ball type air Relief valve

Solids handling semi-vortex impeller

32Ft power cord

Tsurumi Pumps Available in Automatic Operation (PUA) / Auto Alternating (PUW)

PSF Series

VANCS Series Tsurumi Pumps Features

Watertight Cable Entrance with Anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous Tsurumi Pumps duty air filled copper wound highly efficient motor.

Corrosion Resistant Stainless Steel Motor Casing

Dual inside mechanical Tsurumi Pumps with Silicon Carbide vs. Ceramic bottom faces.

Ball type air Relief valve

Solids handling semi-vortex impeller

32Ft power cord

Tsurumi Pumps Available in Automatic Operation (PSFA) / Auto Alternating (PSFW)

VANCS Series

VANCS Series Tsurumi Pumps Features

Watertight Cable Entrance with
anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous duty Tsurumi Pumps air filled copper wound highly efficient motor.

Corrosion Resistant Stainless Steel Motor Casing

Dual inside mechanical Tsurumi Pumps with Silicon Carbide vs. Ceramic bottom faces.

Ball type air Relief valve

Solids handling semi-vortex impeller

32Ft power cord


Performance Range Tsurumi Pumps

 

VANCS Series

 

Tsurumi Pumps Series Model Tsurumi Pumps Discharge Size (in.) Phase Motor Output (HP) Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
PN 50PN2.25 2 Three 1/3 230/460 9 5/8 14 15/16 16
PN 50PN2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 17
PN 50PN2.4 2 Three 1/2 230/460 9 5/8 15 1/4 18
PN 50PN2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 19
PN 50PN2.75 2 Three 1 230/460 9 5/8 15 7/8 22
PN 50PN2.75S 2 Single 1 115/230 9 5/8 15 7/8 24
PN 80PN21.5 3 Three 2 230/460 11 5/8 17 1/8 35
PN 80PN22.2 3 Three 3 208-220/460/575 8 3/8 22 49
PN 80PN23.7 3 Three 5 208-220/460/575 8 3/8 23 3/8 60
PNA 80PNA22.2 3 Three 3 208-220/460/575 8 3/8 28 1/4 51
PNA 80PNA23.7 3 Three 5 208-220/460/575 8 3/8 29 5/8 62
PNW 80PNW22.2 3 Three 3 208-220/460/575 8 3/8 28 1/4 51
PNW 80PNW23.7 3 Three 5 208-220/460/575 8 3/8 29 5/8 62
PSF 50PSF2.25 2 Three 1/3 230/460 9 5/8 14 15/16 16
PSF 50PSF2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 17
PSF 50PSF2.4 2 Three 1/2 230/460 9 5/8 15 1/4 18
PSF 50PSF2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 19
PSF 50PSF2.75 2 Three 1 230/460 9 5/8 15 7/8 21
PSF 50PSF2.75S 2 Single 115/230 9 5/8 15 7/8 15 7/8 24
PSF 80PSF21.5 3 Three 2 230/460 11 5/8 17 1/8 35
PSFA 80PSFA21.5 3 Three 2 208-220/440 7 11/16 24 1/2 37
PSFW 80PSFW21.5 3 Three 2 208-220/440 7 11/16 22 1/2 37
PU 50PU2.15 2 Three 1/5 230/460 8 7/8 14 7/8 15
PU 50PU2.15S 2 Single 1/5 115/230 8 7/8 14 7/8 15
PU 50PU2.25 2 Three 1/3 230/460 9 5/8 14 15/16 16
PU 50PU2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 17
PU 50PU2.4 2 Three 1/2 230/460 9 5/8 15 1/4 17
PU 50PU2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 19
PU 50PU2.75 2 Three 1 230/460 9 5/8 15 7/8 21
PU 50PU2.75S 2 Single 1 115/230 9 5/8 15 7/8 24
PU 80PU21.5 3 Three 2 230/460 11 5/8 18 11/16 35
PU 80PU22.2 3 Three 3 208-220/460/575 8 3/8 22 15/16 49
PU 80PU23.7 3 Three 5 208-220/460/575 8 3/8 24 5/16 60
PUA 80PUA22.2 3 Three 3 208-220/460/575 8 3/8 31 1/8 51
PUA 80PUA23.7 3 Three 5 208-220/460/575 8 3/8 32 1/2 62
PUW 80PUW22.2 3 Three 3 208-220/460/575 8 3/8 29 1/8 51
PUW 80PUW23.7 3 Three 5 208-220/460/575 8 3/8 30 1/2 62
TM 50TM2.25 2 Three 1/3 230/460 15 9 5/8 14 15/16
TM 50TM2.25S 2 Single 1/3 115/230 16 9 5/8 14 15/16
TM 50TM2.4 2 Three 1/2 230/460 16 9 5/8 15 1/4
TM 50TM2.4S 2 Single 1/2 115/230 17 9 5/8 15 1/4
TM 50TM2.75(S) 2 Single 1 115/230 20 9 5/8 15 7/8
TM 80TM21.5 3 Three 2 208-220/440 33 7 11/16 17 1/8
TM 80TM22.2 3 Three 3 208-220/460/575 46 8 3/8 22
TM 80TM23.7 3 Three 5 208-220/460/575 57 8 3/8 23 3/8
TMA 50TMA2.25 2 Three 1/3 230/460 16 9 5/8 14 15/16
TMA 50TMA2.25S 2 Single 1/3 115/230 17 9 5/8 14 15/16
TMA 50TMA2.4 2 Three 1/2 230/460 17 9 5/8 15 1/4
TMA 50TMA2.4S 2 Single 1/2 115/230 19 9 5/8 15 1/4
TMA 50TMA2.75(S) 2 Single 1 115/230 21 9 5/8 15 7/8
TMA 80TMA21.5 3 Three 2 208-220/440 34 7 11/16 24 1/2
TMA 80TMA22.2 3 Three 3 208-220/460/575 48 8 3/8 30 1/4
TMA 80TMA23.7 3 Three 5 208-220/460/575 59 8 3/8 31 1/2

Tsurumi Submersible Pumps GPN Series

Tsurumi Submersible GPN Series

Agitator Tsurumi Submersible Pump GPN Series pumps are ideal for slurry, quarry and gravel pit drainage. Abrasive resistant metals and slow tip speed offer long wear life. Water cooling jacket around the motor allows pump to remain cool even in low water pumping conditions.

GPN35.5

Tsurumi Submersible GPN Series Features

Discharge sizes from 3-6 inches and horsepower ranges from 7.5-30 hp.

4 pole, 1800 rpm motors.

Lower impeller tip speeds extend parts wear life 2-3 times.

Rugged cast iron construction.

Dual silicon carbide mechanical seals.

Internal Thermal motor protection and Tsurumi’s exclusive oil lifter.

Anti wicking cable entrance.

Hardened high chrome impeller and agitator.

Tsurumi Submersible Performance Range

 

GPN Series

 

Model Tsurumi Submersible Discharge Size (in.) Motor Output (HP) Pole Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
GPN35.5 3 7.5 4-1800 208/220/460/575 19 3/16 30 9/16 319
GPN411 4 15 4-1800 208/220/460/575 24 5/16 33 7/8 478
GPN415 2 22 4-1800 208/220/460/575 24 5/16 33 7/8 485
GPN622 6 30 4-1800 460/575 28 9/16 43 3/8 910

Tsurumi Submersible - PSF Series

Tsurumi Submersible PSF Series

The Tsurumi Submersible PSF pump features the highest head in this class. 304 Stainless-steel and composite resin materials are used in all wetted parts.

PSF Series

Tsurumi Submersible PSF Series Features

Watertight Cable Entrance with Anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous duty air filled copper wound highly efficient motor.

Tsurumi Submersible Corrosion Resistant Stainless Steel Motor Casing

Dual inside mechanical Tsurumi Submersible with Silicon Carbide vs. Ceramic bottom faces.

Tsurumi Submersible Ball type air Relief valve

Solids handling semi-vortex impeller

32Ft power cord

Available in Automatic Operation (PSFA) / Auto Alternating (PSFW)

Tsurumi Submersible Performance Range

 

PSF Series

 

Tsurumi Submersible Series Model Tsurumi Submersible Discharge Size (in.) Phase Motor Output (HP) Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
PSF 50PSF2.25 2 Three 1/3 230/460 9 5/8 14 15/16 16
PSF 50PSF2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 17
PSF 50PSF2.4 2 Three 1/2 230/460 9 5/8 15 1/4 18
PSF 50PSF2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 19
PSF 50PSF2.75 2 Three 1 230/460 9 5/8 15 7/8 21
PSF 50PSF2.75S 2 Single 115/230 9 5/8 15 7/8 15 7/8 24
PSF 80PSF21.5 3 Three 2 230/460 11 5/8 17 1/8 35
PSFA 50PSFA2.25 2 Three 1/3 230/460 9 5/8 14 15/16 17
PSFA 50PSFA2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 18
PSFA 50PSFA2.4 2 Three 1/2 230/460 9 5/8 15 1/4 19
PSFA 50PSFA2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 20
PSFA 50PSFA2.75 2 Three 1 230/460 9 5/8 15 7/8 23
PSFA 50PSFA2.75S 2 Single 1 115/230 9 5/8 15 7/8 25
PSFA 80PSFA21.5 3 Three 2 208-220/440 7 11/16 24 1/2 37
PSFW 50PSFW2.25 2 Three 1/3 230/460 9 5/8 14 15/16 17
PSFW 50PSFW2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 19
PSFW 50PSFW2.4 2 Three 1/2 230/460 9 5/8 15 1/4 19
PSFW 50PSFW2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 20
PSFW 50PSFW2.75 2 Three 1 230/460 9 5/8 15 7/8 23
PSFW 50PSFW2.75S 2 Single 1 115/230 9 5/8 15 7/8 25
PSFW 80PSFW21.5 3 Three 2 208-220/440 7 11/16 22 1/2 37

Tsurumi - UEF / UT Series

Tsurumi Pumps UEF/UT Series

The Tsurumi UEF pump features a vortex impeller and wide passage, making it ideal for pumping liquids containing fibrous foreign matter.  The UT pump is a compact economical cast iron pump, which has a large passage that makes it ideal for liquid containing various solids.

UEF Series

Tsurumi UEF/UT Series Features

UEF Series:

Vortex impeller

Built-in thermal protector

Air-filled motor rated for continuous duty

Ideal for tank transfer at small scale treatment facilities

Cast iron construction

Single-phase operation

Optional float switches available

Tsurumi UT Series:

Economical – the UT / UTZ Series is an economical version of the Tsurumi U Series, semi-vortex submersible pumps.  It is designed for a wide range ofapplications.

Large Diameter Passage – The pumo has a large passage that makes it ideal fr liquid containing various solids.

Available in Automatic Operation – Automatic version equipped wtih floats.  (50UTZ2.4S and 50UTZ2.75S)

Tsurumi Performance Range

 

UEF/UT Series

 

Model Tsurumi Discharge Size (in.) Phase Motor Output (HP) Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
50UEF2.4S 2 Single 1/2 115/220 9 1/2 13 33
50UT2.4S 2 Single 1/2 115/220 9 1/2 13 3/4 31
50UT2.75S 2 Single 1 115/220 9 1/2 16 37
50UTZ2.4S 2 Single 1/2 115/220 9 1/2 15 3/4 31
50UTZ2.75S 2 Single 1 115/220 9 1/2 18 37

Ebara Submersible DSC, DSCA3 Series

Large ebara submersible cast iron wastewater, sewage pump

Ebara Submersible DSC, DSCA3

The Ebara Submersible model DSC, DSCA3 pumps Series are constructed of rugged cast iron with heavy-duty, high-efficiency motors suitable for industrial and municipal water and wastewater, sewage and flood control applications. The large ebara submersible non-clog pump has the ability to pass spherical solids up to 8″ in diameter and can be installed in wet or drypit configurations.


Ebara Submersible Specifications

  • Discharge Size: 6″ to 24″
  • Range of HP: 30 to 500 HP
  • Capacity: 530 to 35,000 GPM
  • Head: 8 to 300 Ft.
  • Max. solid diameter: 8 1/8″
  • Max. liquid temperature: 104°F (40°C)
  • FM explosion proof available

Key Features

  • Heavy-duty, air-filled Class H insulated motor – operates cooler with higher efficiencies
  • Watertight cable entry system – protects against moisture and capillary action and reduces maintenance costs
  • Self-cooling jacket – provides high reliability and effectively dissipates heat
  • Double and triple row lubricated thrust bearings – L-10 life of 100,000 hours equates to long, dependable operation and lower maintenance costs
  • Float type leakage detector – provides early warning of mechanical seal failure avoiding costly motor repairs
  • Cartridge type, duplex mechanical seals – assembled in tandem arrangement leading to high reliability and easy maintenance
  • High-efficiency, closed mixed flow impellers – are able to pass large diameter solids with high outputs, preventing clogging and lower operating costs
  • Replaceable case liner ring – maintains working clearances while reducing casing costs

Applications Ebara Submersible

  • Industrial
  • Municipal
  • Water
  • Wastewater
  • Flood control

EBARA Pumps EPD and Optima PRO Drainer

Ebara Pumps Submersible stainless steel sump, drainage

Model EPD, Optima – “PRO Drainer™”

EBARA’s Model EPD and Optima “PRO Drainer™” are a complete solution for the pumping of slurry or semi-dirty water. Manufactured of high quality, corrosive resistant 304 stainless steel components, the PRO Drainer series are lighter weight compared to conventional cast iron pumps. This efficient, versatile and reliable pump is available in fractional horsepowers and suited for many industrial, commercial, residential and agricultural liquid applications and ideal for fixed or portable installations.

Model EBARA Pumps EPD is UL and CSA listed. Model Optima UL certified.


Specifications EBARA Pumps

  • Discharge Size: 1 1/4″ to 1 1/2″
  • Range of HP: 1/3 to 1 1/2 HP
  • Capacity: to 86 GPM
  • Head: to 61 Ft.
  • Max. solid diameter: 3/8″
  • Max. liquid temperature: 122°F/50°C (140°F/60°C intermittent duty)
  • Available in single and three phase models; manual or automatic operation

Key Features EBARA Pumps

  • Constructed of high quality, corrosion resistant 304 stainless steel (Note: Optima has Noryl impeller)
  • Oil lubricated double mechanical shaft seal
  • Air filled, continuous duty motors rated for up to 20 starts per hour
  • Built-in thermal protection with automatic reset
  • Built to operate with full or partial submergence (Optima pumps are available with an optional Low Suction Device)
  • Vertical discharge allows pumpage to carry heat away from the motor

Applications EBARA Pumps

  • EBARA Pumps Drainage (basements, sumps, excavation)
  • Seepage (residential, commercial, industrial)
  • Effluent and containment transfer
  • Emptying (pools, water storage structures)
  • Wastewater (from trays, wet bars, washing machines)
  • Decorative fountains
  • Irrigation
  • Mound systems, leach fields
  • Dewatering (move water/effluent to sewage systems)
Pages:« Prev12
You might also likeclose