Submersible

Ebara Submersible DSC, DSCA3 Series

Large ebara submersible cast iron wastewater, sewage pump

Ebara Submersible DSC, DSCA3

The Ebara Submersible model DSC, DSCA3 pumps Series are constructed of rugged cast iron with heavy-duty, high-efficiency motors suitable for industrial and municipal water and wastewater, sewage and flood control applications. The large ebara submersible non-clog pump has the ability to pass spherical solids up to 8″ in diameter and can be installed in wet or drypit configurations.


Ebara Submersible Specifications

  • Discharge Size: 6″ to 24″
  • Range of HP: 30 to 500 HP
  • Capacity: 530 to 35,000 GPM
  • Head: 8 to 300 Ft.
  • Max. solid diameter: 8 1/8″
  • Max. liquid temperature: 104°F (40°C)
  • FM explosion proof available

Key Features

  • Heavy-duty, air-filled Class H insulated motor – operates cooler with higher efficiencies
  • Watertight cable entry system – protects against moisture and capillary action and reduces maintenance costs
  • Self-cooling jacket – provides high reliability and effectively dissipates heat
  • Double and triple row lubricated thrust bearings – L-10 life of 100,000 hours equates to long, dependable operation and lower maintenance costs
  • Float type leakage detector – provides early warning of mechanical seal failure avoiding costly motor repairs
  • Cartridge type, duplex mechanical seals – assembled in tandem arrangement leading to high reliability and easy maintenance
  • High-efficiency, closed mixed flow impellers – are able to pass large diameter solids with high outputs, preventing clogging and lower operating costs
  • Replaceable case liner ring – maintains working clearances while reducing casing costs

Applications Ebara Submersible

  • Industrial
  • Municipal
  • Water
  • Wastewater
  • Flood control

EBARA Pumps EPD and Optima PRO Drainer

Ebara Pumps Submersible stainless steel sump, drainage

Model EPD, Optima – “PRO Drainer™”

EBARA’s Model EPD and Optima “PRO Drainer™” are a complete solution for the pumping of slurry or semi-dirty water. Manufactured of high quality, corrosive resistant 304 stainless steel components, the PRO Drainer series are lighter weight compared to conventional cast iron pumps. This efficient, versatile and reliable pump is available in fractional horsepowers and suited for many industrial, commercial, residential and agricultural liquid applications and ideal for fixed or portable installations.

Model EBARA Pumps EPD is UL and CSA listed. Model Optima UL certified.


Specifications EBARA Pumps

  • Discharge Size: 1 1/4″ to 1 1/2″
  • Range of HP: 1/3 to 1 1/2 HP
  • Capacity: to 86 GPM
  • Head: to 61 Ft.
  • Max. solid diameter: 3/8″
  • Max. liquid temperature: 122°F/50°C (140°F/60°C intermittent duty)
  • Available in single and three phase models; manual or automatic operation

Key Features EBARA Pumps

  • Constructed of high quality, corrosion resistant 304 stainless steel (Note: Optima has Noryl impeller)
  • Oil lubricated double mechanical shaft seal
  • Air filled, continuous duty motors rated for up to 20 starts per hour
  • Built-in thermal protection with automatic reset
  • Built to operate with full or partial submergence (Optima pumps are available with an optional Low Suction Device)
  • Vertical discharge allows pumpage to carry heat away from the motor

Applications EBARA Pumps

  • EBARA Pumps Drainage (basements, sumps, excavation)
  • Seepage (residential, commercial, industrial)
  • Effluent and containment transfer
  • Emptying (pools, water storage structures)
  • Wastewater (from trays, wet bars, washing machines)
  • Decorative fountains
  • Irrigation
  • Mound systems, leach fields
  • Dewatering (move water/effluent to sewage systems)

Tsurumi Submersible / Portable Residue Dewatering Pumps

Tsurumi Submersible Portable , capability of pumping water down to a minimum level of 1mm

Common Features Tsurumi Submersible Of LSP1.4S and LSC1.4S

  • Cable entry with anti-wicking block
  • High-grade bearings for high temperature operation
  • Integrated high-performance motor
  • Pump is provided with a dual-face mechanical seal housed in an oil-filled chamber. The motor is double protected from ingress of water
  • Service life of mechanical seal is extended by OIL LIFTER ( Patent Pending )
  • V-Ring is mounted to act as a dust seal to prevent fine corrosive particles in the priming fluid from reaching the mechanical seal
  • Impeller lock minimized by semi-vortex design
  • Cooling system/discharge Port <flow-through design > ( Pumped water cools the motor, which enables the unit to run continously even when the pump body is exposed to air )
  • Light, strong materials ( Light but strong materials such as aluminium die castings and water-resistant spesial syntetic rubber are used on entire pump )
  • Low-Water Level Draining Mechanism ( Pump can suck up water from shallow puddles and water can be drained down to a minimum level of 1mm. the new siphon breaker mechanism for LSP and the newly developed swing check valve for LSC Prevents reverse flow of water once it is sucked in.

Applications Examples Tsurumi Submersible

Tsurumi Submersible LSC1.4S Series

  1. Tsurumi Submersible Cleaning of Fish Pond
  2. Dewatering in constructions site
  3. Tsurumi Submersible & Portable for Draining of Rainwater and Puddles
  4. For Cleaning / Draining of Swimming Pools
  5. Emergency Draining of Basement Car Park
  6. Draining of Water in Flat and Low Lying Area for Prevention of Mosquitoes Breeding

 

Ebara - Submersible cast iron grinder pump

Model DGUII, Ebara – Submersible cast iron grinder pump

The Ebara – Submersible cast iron grinder pump model DGUII, DGFU cast iron submersible grinder pumps are ideal for use in small-scale pressurized commercial or residential sewage transfer systems requiring low flow and high pressure rates. The heavy-duty high chrome iron grinder system has powerful blades that reduce solid sizes for smooth, non-clogging flow. A reversible grinder ring provides longer service life and less maintenance. The pump is small and light weight affording ease in transport and use in temporary installations. FM explosion proof motors are available.


Specifications Ebara – Submersible cast iron grinder pump

  • Discharge Size: 1 1/4″, 2″
  • Range of HP: 2 to 5 HP
  • Capacity: 5 to 80 GPM
  • Head: 27 to 148 Ft.
  • Max. solid diameter: 3″
  • Max. liquid temperature: 104°F (40°C)
  • FM explosion proof available

Key Features Ebara – Submersible cast iron grinder pump

  • Heavy-duty high chrome iron grinder system – powerful blades reduce solid size for non-clogging flow
  • Semi-open vortex type recessed impeller – vortex action prevents clogging and handles stringy material better providing durability, high reliability with lower maintenance costs
  • Air-filled Class F insulated heavy duty motor – operates cooler with higher efficiencies
  • Built-in motor protection – protects against overheat, out of phase, single phasing and no load
  • 60,000 hour bearings – long dependable operation, lower maintenance costs
  • Double mechanical seals – hard faced upper and lower seals operate in an oil bath providing longer service life and lower maintenance costs
  • Stainless steel shaft – high tensile strength and corrosion resistance
  • Small and light weight portability – easy to transport for temporary installations

Applications Ebara – Submersible cast iron grinder pump

  • Residential/Commercial sanitary waste
  • Small-scale pressurized sewage transfer systems
  • Drainage transfer Ebara – Submersible cast iron grinder pump
  • Available in packaged basin systems

Tsurumi Submersible Pumps KTD Series

Tsurumi Submersible KTD Series

Tsurumi Submersible Agitator Pump KTD Series is a cast iron made, heavy-duty slurry pump employing the Tsurumi Submersible KTZ Series as the base. An agitator is provided to assist smooth suction of the pumping fluid. The side-flow, top-discharge design keeps the motor cooling even if the pump is operated continuously with its motor exposed in air, and it makes the pump easier to place in a confined space.

Tsurumi Submersible Pumps-KTD Series

KTD Series Tsurumi Submersible Features

Discharge sizes from 2-3 inches and horsepower ranges from 2.7-4 hp.

2 pole, 3600 rpm motors.

Rugged cast iron construction.

Dual silicon carbide mechanical seals.

Internal Thermal motor protection and Tsurumi’s exclusive oil lifter.

Anti wicking cable entrance.

Suitable for transferring or draining bentonite slurry used for slurry drilling, draining slurry mixed water in civil engineering works or foundation works.

Performance Range KTD Series

 

Model Discharge Size (in.) Motor Output (HP) Pole Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
KTD22.0 2 2.7 2-3600 208/230/460/575 9 1/4 23 3/16 86
KTD33.0 3 4 2-3600 208/230/460/575 11 11/16 25 3/4 145

GSZ Series Tsurumi Submersible

Tsurumi Submersible Sewage GSZ Series

Utilizing 4 pole, 1800 rpm motors and 6 pole, 1200 rpm motors the GSZ Series offers longer wear life on parts due to the slower impeller tip speed. GSZ pumps are the most formidable high volume slurry/dewatering pumps offered today.

Tsurumi Submersible

Tsurumi Sewage GSZ Series Features

Discharge sizes from 6-10 inches and horsepower ranges from 30-100 hp.

4 pole, 1800 rpm motors or 6 pole, 1200 rpm motors.

Seal Pressure relief ports on 4 pole, 1800 rpm models.

Lower impeller tip speeds extend parts wear life 2-3 times.

Rugged cast iron construction.

Dual silicon carbide mechanical seals.

Internal Thermal motor protection and Tsurumi’s exclusive oil lifter.

Anti wicking cable entrance.

Performance Range  GSZ Series

Model Discharge Size (in.) Motor Output (HP) Pole Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
Tsurumi Submersible GSZ-45-4 8 60 4-1800 460/575 36 59 13/16 2420
Tsurumi Submersible GSZ-55-4 10 75 4-1800 460/575 41 5/16 68 5/16 2530
Tsurumi Submersible GSZ-75-4L 10 100 4-1800 460/575 41 5/16 68 5/16 2640
Tsurumi Submersible GSZ2-22-6 8 30 6-1200 208/230/460/575 38 51 3/8 1540
Tsurumi Submersible GSZ2-37-4H 6 50 4-1800 208/230/460/575 35 7/16 56 11/16 1870
Tsurumi Submersible GSZ2-37-4H 8 50 4-1800 208/230/460/575 36 57 7/8 1870
Tsurumi Submersible GSZ2-37-6 8 50 6-1200 208/230/460/575 39 15/16 52 15/16 2200

Tsurumi Sewage Submersible B Series

 Sewage -B Series

sewage-tsurumiOur Tsurumi Sewage submersible B Series non-clog pumps are used primarily in municipal water supply stations and sewage treatment plants for pumping water, sewage, and digested sludge.

In industry, these pumps are efficient for controlling cooling water, process and wastewater, and abrasive materials.

 

Features Tsurumi Sewage Submersible B Series:

Semi-open, single vane impellers (1 hp – 5 hp models)

Enclosed multi-vane impellers (7.5 hp – 300 hp models)

Field adjustable/replaceable wear plates

Highly efficient air filled motors for continuous duty operation

Available with class E, B, F insulation to minimize operation costs. Double inside mechanical seals with Sic-Sic faces operate in a separate oil-filled chamber.

Anti-wicking block prevents water incursion to the stator if cable is accidentally damaged

Double-shielded, permanently lubricated high-temp C3 ball bearings rated for B-10 life of 60,000 hours

Water jacket ensures perfect water cooling by circulating drainage around the motor housing (available on 30 hp or above.

Tsurumi Sewage submersible B Series :

Motor Output (HP) Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
B Series 100B43.7 4 Three 5 230/460/575 23 11/16 27 3/16 190(Free)/176(TOS)
B Series 100B43.7H 4 Three 5 230/460/575 23 7/16 26 1/4 183(Free)/170(TOS)
B Series 100B45.5 4 Three 7 1/2 230/460/575 27 35 13/16 324(Free)/309(TOS)
B Series 100B47.5 4 Three 10 230/460/575 27 36 5/8 371(Free)/356(TOS)
B Series 100B47.5L 6 Three 10 230/460/575 34 5/16 42 3/4 440(Free)/380(TOS)
B Series 150B411 6 Three 15 230/460/575 35 1/4 43 1/4 550(Free)/490(TOS)
B Series 150B415 6 Three 20 230/460/575 35 1/4 46 600(Free)/530(TOS)
B Series 150B47.5H 6 Three 10 230/460/575 32 13/16 37 1/2 460(Free)/400(TOS)
B Series 150B63.7 6 Three 5 230/460/575 33 35 9/16 620(Free)/550(TOS)
BK Series 150BK422 6 Three 30 230/460/575 38 7/8 53 5/16 1220(Free)/1090(TOS)
B Series 200B415 8 Three 20 230/460/575 38 1/4 47 1/16 660(Free)/630(TOS)
B Series 200B47.5 8 Three 10 230/460/575 36 7/16 42 3/4 460(Free)/470(TOS)
BK Series 200BK422 8 Three 30 230/460/575 42 13/16 51 15/16 1230(Free)/1100(TOS)
BK Series 200BK422H 8 Three 30 230/460/575 41 1/16 53 5/16 1230(Free)/1110(TOS)
B Series 50B2.75H(S) 2 3ø/1ø 1 115/230 (1ø)230/460/575 (3ø) 15 15/16 16 5/16 53(Free)/51(TOS)

Pompa Grundfos SP 3A-15

grundfos submersible pumps-SP 3A-15

 

 

 

 

 

 

 

GRUNDFOS Submersible Pump SP 3A-15
Specification SP 3A-15
Diameter : 4″
Daya Maximum : 240 V
Power : 1,1 Kw 1Ph
Maximum Head : 95 m
Maximum Flow : 5000 L/h
More Info SP 3A-15
The Grundfos SP3A-15 is an all 304 stainless steel submersible pump
fitted with a genuine Grundfos MS402 304 stainless steel single phase
1.1 kW motor. Suitable for medium flow irrigation systems, commercial
and industrial applications, and domestic or stock water tank filling applications.
The Grundfos SP series pumps are heavy duty and are supplied with a 2-year warranty
Max head 95m
Flow 400L to 5000L/hour

Menjual Pompa Air Industri

banyak macam-macam produk pompa yang kami jual, dengan kualitas dan penggunaan  bahan-bahan yang aman, menjadikan pompa yang kami jual sangatlah handal dan memiliki daya tahan kual, kami mangajak setiap konsumen untuk menghemat penggunaan air bersih dengan memakai air bersih sesuai kebutuhan saja.

Wilo-EMU 8 inch Series - Wilo Pumps

Design Pumps

Multistage 8” submersible pumps in sectional construction for vertical and horizontal installation

 

Application Pumps

  • For drinking water supply pumps / general water supply from boreholes and rainwater storage tanks
  • Process water supply
  • Municipal water supply
  • Sprinkling and irrigation
  • Pressure boosting pumps
  • Pumping water in industrial applications pumps and pumps water control
  • Utilisation of geothermal energy
  • Utilisation in offshore areas

 

Type key Pumps

 

Example: Wilo-EMU NK 80.2-17 + NU 801-2/40
Hydraulics: NK 80.2-17
NK Hydraulics
8 Diameter of the hydraulic unit in inches [“]
0 Size
2 Impeller made of special material
17 Number of hydraulic stages
Motor: NU 801-2/40
NU Submersible motor
801 Overall size (4… = 4″; 5…, 6… = 6″; 7…, 8… = 8″)
2 Number of poles
40 Package length

Special features/product advantages Pumps

  • Heavy-duty version made of cast iron or zinc-free bronze
  • Pressure shroud in corrosion-free and hygienic stainless steel version with rubber bearings for reducing noise and vibration
  • Impellers made of zinc-free bronze
  • Drinking water version with ACS approval
  • Optional Ceram CT coating for increasing efficiency

 

Technical data Pumps

  • Mains connection: 3~400 V, 50 Hz
  • Immersed operating mode: S1
  • Max. fluid temperature (higher temperatures on request):
    • NU 4… / NU 5… / NU 6… / NU 7… / NU 811 = 30 °C
    • NU 801 = 20 °C
  • Minimum pumps motor flow:
    • NU 4… / NU 801 = 0.1 m/s
    • NU 5… / NU 7… = 0.16 m/s
    • NU 611 = 0.1 – 0.5 m/s
    • NU 811 = 0.5 m/s
  • Max. sand content: 35 g/m3
  • Max. number of starts: 10‐20/h (depending on type)
  • Max. immersion depth:
    • NU 4…, NU 5… NU 7… = 350 m
    • NU 611, NU 811 = 100 m
    • NU 801 = 300 m
  • Protection class: IP 68
  • Control range for frequency converter:
    • NU 4… / NU 5… / NU 7… / NU 611 / NU 811 = 30-50 Hz
    • NU 801 = 25-50 Hz

 

Equipment/function Pumps

  • Multistage submersible pumps -motor pumps with radial or semi-axial impellers
  • Hydraulics and motor freely configurable according to power requirements
  • Integrated non-return valve (depending on type)
  • NEMA coupling
  • Three-phase motor for direct or star-delta starting
  • Hermetically cast motors
  • Rewindable motors

 

Description/design Pumps

Submersible-motor pumps for vertical or horizontal installation.

Hydraulics pumps

Multistage submersible-motor pumps with radial or semi-axial hydraulics. Housing parts made of EN‐GJL or EN‐GJS with 2K coating or G‑CuSn10, impellers made of Noryl (NK 80…, 81…, 82…) or G‑CuSn10. Pressure port as threaded connection (types NK 80…, 81…, 82…) or flange connection (types KD…), integrated non-return valve. Pressure port as flange or threaded connection, without non-return valve (types K…, NK 86…, 87…).

Motor

Three-phase motor for direct and star-delta starting Sealed, hermetically cast motor with enamel-insulated winding, resin-impregnated (NU 4…, NU 5…, NU 7…) or rewindable motor with PVC‐insulated winding (NU 611…, NU 8…). Motor shroud made of stainless steel, A2/A4 quality.

Pumps connection as standard NEMA connection. Sealing of motor shaft achieved through the use of a rotary shaft seal (NU 4…) or mechanical seal made of solid silicon carbide material. Self-lubricating motor bearing. Thrust bearing with rockers for absorption of high axial thrust. Negative axial thrust is absorbed by the counter-thrust bearing.

Motors in the NU 4…, NU 5… and NU 7… series are filled with a water‐glycol mixture, motors in the NU 611 and NU 811 series are filled with a water-glycerine mixture. NU 611 and NU 8…series motors can also be filled with drinking water (T version). Frequency converter operation is permitted (SF 1.1).

Cooling

The motor is cooled by the fluid. The motor must always be operated in submerged state. The limit values for the max. fluid temperature and the minimum flow rate must not be exceeded. Vertical installation is possible optionally with or without cooling jacket. For horizontal installation, bearing brackets must be used for reinforcement of the unit. An anti-vortex plate or cooling jacket may be used to improve the inlet flow.

Pressure shroud

The pressure shroud is used for direct installation of the unit in the pipe system. Standard models are without mounted non-return valves. The maximum inlet pressure is 10 bar.

 

Configuration Pumps

  • No suction mode is possible with these units!
  • The unit must be fully immersed in water during operation.

 

Scope of delivery Pumps

  • Hydraulics + motor fully assembled
  • Connecting cable approved for drinking water, cable cross-section and length per standard design or per customer request
  • Installation and operating instructions

 

Options Pumps

  • Special materials pumps
  • Drinking water version with ACS approval
  • 60 Hz version
  • PT100 sensor for thermal motor monitoring
Pages:« Prev123456Next »
You might also likeclose