Submersible

Tsurumi Pumps - LHW Series

Tsurumi Pumps Submersible LHW Series

Tsurumi Pumps LHW series achieves extremely high head capabilities. Our dual staged enclosed impellers are just one of many features found engineered into these durable tsurumi pumps which can help you solve all your long distance water transfer needs.

LH23.0W

Tsurumi Pumps LHW Series Features

Discharge sizes from 2-4 inches and horsepower range from 4-40 hp

Replaceable and adjustable high chrome wear rings provide increased wear resistance.

Built in thermal and amperage protectors prevent motor failure in run-dry or surge conditions.

High pressure dual silicon carbide mechanical seals operate in a separate oil chamber and are capable of withstanding operating depths of 328 feet.

Seal pressure relief ports provide a flow path above the pump casing and allow water release from the pump and away from the shaft. This protects the mechanical seals from excessive pumping pressure or water hammer in high head pumping applications.

Anti-wicking cable entrance and Tsurumi’s exclusive oil lifter for added protection.

Performance Range Of Tsurumi Pumps

LHW Series

 

Model Discharge Bore (in.) Motor Output (HP) Shipping Weight (lbs.) Cable Length (ft.) Voltage (V) Weight (lbs.) Diameter (in.) Height (in.)
LH23.0W 2 4 Consult Factory 50 208-230/460/575 101 7-5/16 24-13/16
LH311W 3 15 N/A 50 208/230/460/575 286 10-5/8 40-5/16
LH322W 3 30 N/A 50 208/230/460/575 670 13 48-5/8
LH33.0 3 4 Consult Factory 50 208-230/460/575 93 7-5/16 25-3/8
LH430W 4 40 N/A 50 208/230/460/575 714 14-3/8 54-1/8

Ebara Pumps DL - Submersible Sewage Pumps

EBARA Pumps DL-DL W/C Submersible

SUBMERSIBLE SEWAGE PUMPS ( DL ) WITH CUTTER (DL W/C)
in cast iron
Submersible sewage pumps ( DL ) with cutter (DL W/C) in cast iron

APPLICATIONS Ebara Pumps DL

• Ideal for waste water applications containing soft or fibrous solids
• Industrial waste water drainage

TECHNICAL DETAILS Ebara Pumps DL
• Non-Clog single-channel, open double-channel, no clog semi open impeller prevents
clogging by fibrous matter
• Range of models from 65 to 300 mm discharge size and power
up to 45 kW (DL)

Ebara Pumps DL TECHNICAL DATA
• Maximum temperature of the liquid: 40°C
• Max solids size for passage: 46 mm (65DL, 65DL W/C)
46 mm (80DL, all DLC, 80 DL W/C)
57 mm (100DL, 100DLB, 100DLW/C,
100DLB W/C)
68 mm (150DL up to 22kW)
73 mm (200DL up to 22kW)
76 mm (all models 30÷45 kW)
79 mm (250DL up to 22kW)
88 mm (300DL up to 22kW)
• Max fibers lenght: 195mm (65DL, 65DLW/C)
240mm (80DL, all DLC, 80DLW/C)
300mm (100DL, 100DLB, 100DLW/C)
400mm (150DL from 5,5 up to 45kW)
500mm (200DL up to 45kW)
550mm (250DL up to 45kW)
600mm (300DL up to 45kW)
• Flanges: DN65, DN80, DN100, DN150, DN200, DN250, DN300 (DL)
DN65, DN80, DN100 (DLW/C)

MOTOR Ebara Pumps DL TECHNICAL DATA

• Air filled dry submersible 4 poles motor
• Insulation class F
• Degree protection IP68
• 380-415±10%, 50Hz (1,5÷7,5kW) (DL and DLW/C) threephase voltage
400-415±10%, 50Hz ( ∆connection11÷2kW) (DL) threephase voltage
380-415±10%, 50Hz (∆connection 30÷45kW) (DL) threephase voltage
• Power up to 45 kW (DL)
up to 7.5kW (DLW/C)

Ebara Pumps DL MATERIALS
• Pump casing, impeller with
cutter (DLW/C), vitex impeller (DLC and DLB) , elbow in cast iron
• Shaft in AISI 403
• Mechanical seal: SiC/SiC/NBR (pump side)
Carbon/Ceramic/NBR (motor side)

Submersible stainless steel pump - Ebara Pump

Ebara Pump Submersible stainless steel pump, effluent

Model DWU – “Dominator”

The EBARA Pump Model DWU “Dominator” sewage pumps are designed for reliable pumping of wastewater with suspended solids up to 2″ in diameter. The EBARA Pump Dominator is superior in dependability and efficiency. High-quality stainless steel components are stronger, dimensionally consistent and lighter weight compared to conventional cast iron parts. Stainless steel construction is ideal for residential, commercial and industrial applications. Double mechanical seals are a standard feature that ensure long life.

Model Ebara Pump DW(A)(F)U, DWX(A)(F)U is CSA certified (3HP excluded).


Specifications Ebara Pump

  • Discharge Size: 2″ (NPT or ANSI Flanged)
  • Range of HP: 1/2 to 3 HP
  • Capacity: 8 to 235 GPM
  • Head: 8 to 74 Ft.
  • Max. liquid temperature: 104°F (40°C)
  • Max. solid diameter: 2″
  • Available in single or three phase models; manual or automatic operation

Key Features Ebara Pump

  • Constructed of high-quality, corrosion resistant 304 stainless steel
  • Motor is 2 pole submersible, rated continuous duty
  • 104°F maximum fluid temperature continuous operation, fully submerged; 140° F intermittent operation
  • Automatic float switch
  • NPT thread discharge or 150 lb ANSI flange
  • Double mechanical seal with viton elastomers
  • Shielded, pre-lubricated ball bearings
  • Single channel and vortex impellers
  • Thermal overload protection
  • QDC system available as an optional accessory

Ebara Pump Applications

  • Wastewater with suspended solids
  • Residential
  • Commercial
  • Industrial
  • Fountains, water displays
  • Containment transfer
  • Irrigation
  • Drainage
  • Emptying (pools, water storage structures)

Grundfos Pumps - SE Series

Grundfos Pumps - SE Series-SEV and SE1 SeriesGrundfos Pumps Overview

The Grundfos Pumps SEV and SE1 pumps are designed for handling wastewater, process water and unscreened raw sewage in heavy-duty municipal, utility, and industrial applications.

These two technologically very advanced series of pumps are available with efficient single-channel or SuperVortex impellers allowing for free passage of solids up to 100 mm in size. This greatly reduces the risk of clogging, and ensures maximum up-time and low operating costs.

The SEV and SE1 pumps can be permanently installed by means of an auto-coupling system or with a fixed pipe connection, submerged or dry, without separate motor cooling arrangements. The pumps are also suitable for free-standing installation, or as portable utility pumps.

 

 

Grundfos Pumps Applications

The SE Grundfos pumps are designed to optimise the operation of a system. Reliability, simple maintenance, and complete system compatibility are some of the main advantages.

Features and benefits Grundfos Pumps

  • Cable plug connection
  • Unique clamp connection
  • Single-channel and vortex impellers
  • Solids passage up to 100 mm
  • Unique cartridge shaft seal
  • Modular design
  • Minimum downtime
  • Motor based on premium efficiency components
  • Unique liquid-less motor cooling system
  • Many sensor options.

Grundfos Wastewater Treatment

Grundfos Wastewater Treatment

Wastewater treatment is the process of removing contaminants from water discharged from domestic, industrial or commercial premises as well as surface run-off. Grundfos Wastewater treatment typically utilises mechanical, biological, and chemical processes to remove these contaminants. Grundfos Wastewater Treatment can supply a whole range of components for a complete mechanical, biological, and chemical wastewater treatment plant.

The process of Grundfos wastewater treatment varies from simple tanks, relying solely on sedimentation, to the refined treatment processes with advanced biological treatment that we know today. Treatment aims at reducing the pollution contained in the Grundfos Wastewater Treatment – Water Treatment such as bacteria and viruses, oxygen consuming components, nutrients, pharmaceuticals, chemical substances and heavy metals from wastewater before it is discharged to the receiving waters.

Grundfos Wastewater Treatment has decades of experience developing controller and monitoring systems for pumping solutions and manufactures its own pump motors for all fluid types and flow requirements. This ensures a perfect match with hydraulics, motors, electrics, and all other mechanical components that make up a comprehensive pumping solution, ensuring the best possible efficiency point.

Control and monitoring systems increase the potential for improving both efficiency and reliability. Grundfos supplies external variable speed drives (Grundfos CUE) that are pre-programmed for the Grundfos range of products, ensuring optimal operation.

The high-efficiency motors developed by Grundfos, with or without an integrated or external variable frequency drive, meet and in some cases exceed the requirements set by motor-efficiency legislation around the world. Considering that on average 85% of a normal pump system’s Life Cycle Cost (LCC) is energy costs, switching to Grundfos pumps with high-efficiency motor technology can mean a LCC reduction of up to 50% and a reduction in environmental impact.

Grundfos Wastewater Treatment offers a broad range of equipment designed specifically for wastewater handling and treatment. The sustainability of a sewage treatment plant requires that the solution is durable, ensuring cost effective and trouble-free operation. Grundfos Wastewater Treatment remains with you and your solution for the duration, offering commissioning agreements to ensure correct installation and service agreements offering cover for all eventualities, from routine maintenance to spare parts.

Grundfos Wastewater Treatment-Water Treatment

Tsurumi Pumps - Utility Series

Utility Series by Tsurumi Pumps

Tsurumi Pumps Not every project needs a large pump, yet the application may call for a quality of pump a few grades higher than what’s found in retail stores. In order to satisfy your customers, turn to Tsurumi Tsurumi Pumps line of contractor ready utility pumps.

L4000

Tsurumi Pumps Utility Series Features

L4000 Series DC Pump:
12 volt DC pump.

1.5″ and 2″ discharge ports.


Liquid cooled motor.


Double ball bearing.


12 pole motor.


Built in check valve.

F-13

Tsurumi Pumps Utility Series Features

F-13 Utility Pump:
Air-filled motor.

Built in float switch for automatic or manual operation.

1.25″ discharge with garden hose adapter.

With an air filled motor, this lightweight pump is suitable for all your general dewatering applications whether it be draining the children’s pool, or removing access water from the basement floor. There’s a built in float switch allowing you to operate the pump automatically or manually depending on the situation.

Tsurumi Pumps Performance Range

 

Utility Series

 

Model Discharge Size (in.) Motor Output (HP) Voltage (V) Cable Length (ft.) Diameter (in.) Height (in.) Weight (lbs.)
F-13 1 1/4 in. 1/4 hp (nominal) 115V 10 ft. 6.6 lbs.
L4000 1 1/2 or 2 in. 12V 6 ft. 5.4 lbs.

Tsurumi Pumps VANCS Series

Tsurumi Pumps VANCS Series

Our VANCS series of Tsurumi pumps offer automatic or manual operation and feature the most advanced material composition available in Tsurumi Pumps submersible pumps.

PN

VANCS Series Tsurumi Pumps Features

Watertight Cable Entrance with Anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous duty Tsurumi Pumps air filled copper wound highly efficient motor.

Corrosion Resistant Stainless Steel Motor Casing.

Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces.

Ball type air Relief valve

Solids handling semi-vortex impeller

Tsurumi Pumps Available Automatic Operation (PNA) / Auto Alternating (PNW)

PU Series

VANCS Series Tsurumi Pumps Features

Watertight Cable Entrance Tsurumi Pumps with Anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous duty Tsurumi Pumps air filled copper wound highly efficient motor.

Corrosion Resistant Tsurumi Pumps Stainless Steel Motor Casing

Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces.

Ball type air Relief valve

Solids handling semi-vortex impeller

32Ft power cord

Tsurumi Pumps Available in Automatic Operation (PUA) / Auto Alternating (PUW)

PSF Series

VANCS Series Tsurumi Pumps Features

Watertight Cable Entrance with Anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous Tsurumi Pumps duty air filled copper wound highly efficient motor.

Corrosion Resistant Stainless Steel Motor Casing

Dual inside mechanical Tsurumi Pumps with Silicon Carbide vs. Ceramic bottom faces.

Ball type air Relief valve

Solids handling semi-vortex impeller

32Ft power cord

Tsurumi Pumps Available in Automatic Operation (PSFA) / Auto Alternating (PSFW)

VANCS Series

VANCS Series Tsurumi Pumps Features

Watertight Cable Entrance with
anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous duty Tsurumi Pumps air filled copper wound highly efficient motor.

Corrosion Resistant Stainless Steel Motor Casing

Dual inside mechanical Tsurumi Pumps with Silicon Carbide vs. Ceramic bottom faces.

Ball type air Relief valve

Solids handling semi-vortex impeller

32Ft power cord


Performance Range Tsurumi Pumps

 

VANCS Series

 

Tsurumi Pumps Series Model Tsurumi Pumps Discharge Size (in.) Phase Motor Output (HP) Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
PN 50PN2.25 2 Three 1/3 230/460 9 5/8 14 15/16 16
PN 50PN2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 17
PN 50PN2.4 2 Three 1/2 230/460 9 5/8 15 1/4 18
PN 50PN2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 19
PN 50PN2.75 2 Three 1 230/460 9 5/8 15 7/8 22
PN 50PN2.75S 2 Single 1 115/230 9 5/8 15 7/8 24
PN 80PN21.5 3 Three 2 230/460 11 5/8 17 1/8 35
PN 80PN22.2 3 Three 3 208-220/460/575 8 3/8 22 49
PN 80PN23.7 3 Three 5 208-220/460/575 8 3/8 23 3/8 60
PNA 80PNA22.2 3 Three 3 208-220/460/575 8 3/8 28 1/4 51
PNA 80PNA23.7 3 Three 5 208-220/460/575 8 3/8 29 5/8 62
PNW 80PNW22.2 3 Three 3 208-220/460/575 8 3/8 28 1/4 51
PNW 80PNW23.7 3 Three 5 208-220/460/575 8 3/8 29 5/8 62
PSF 50PSF2.25 2 Three 1/3 230/460 9 5/8 14 15/16 16
PSF 50PSF2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 17
PSF 50PSF2.4 2 Three 1/2 230/460 9 5/8 15 1/4 18
PSF 50PSF2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 19
PSF 50PSF2.75 2 Three 1 230/460 9 5/8 15 7/8 21
PSF 50PSF2.75S 2 Single 115/230 9 5/8 15 7/8 15 7/8 24
PSF 80PSF21.5 3 Three 2 230/460 11 5/8 17 1/8 35
PSFA 80PSFA21.5 3 Three 2 208-220/440 7 11/16 24 1/2 37
PSFW 80PSFW21.5 3 Three 2 208-220/440 7 11/16 22 1/2 37
PU 50PU2.15 2 Three 1/5 230/460 8 7/8 14 7/8 15
PU 50PU2.15S 2 Single 1/5 115/230 8 7/8 14 7/8 15
PU 50PU2.25 2 Three 1/3 230/460 9 5/8 14 15/16 16
PU 50PU2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 17
PU 50PU2.4 2 Three 1/2 230/460 9 5/8 15 1/4 17
PU 50PU2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 19
PU 50PU2.75 2 Three 1 230/460 9 5/8 15 7/8 21
PU 50PU2.75S 2 Single 1 115/230 9 5/8 15 7/8 24
PU 80PU21.5 3 Three 2 230/460 11 5/8 18 11/16 35
PU 80PU22.2 3 Three 3 208-220/460/575 8 3/8 22 15/16 49
PU 80PU23.7 3 Three 5 208-220/460/575 8 3/8 24 5/16 60
PUA 80PUA22.2 3 Three 3 208-220/460/575 8 3/8 31 1/8 51
PUA 80PUA23.7 3 Three 5 208-220/460/575 8 3/8 32 1/2 62
PUW 80PUW22.2 3 Three 3 208-220/460/575 8 3/8 29 1/8 51
PUW 80PUW23.7 3 Three 5 208-220/460/575 8 3/8 30 1/2 62
TM 50TM2.25 2 Three 1/3 230/460 15 9 5/8 14 15/16
TM 50TM2.25S 2 Single 1/3 115/230 16 9 5/8 14 15/16
TM 50TM2.4 2 Three 1/2 230/460 16 9 5/8 15 1/4
TM 50TM2.4S 2 Single 1/2 115/230 17 9 5/8 15 1/4
TM 50TM2.75(S) 2 Single 1 115/230 20 9 5/8 15 7/8
TM 80TM21.5 3 Three 2 208-220/440 33 7 11/16 17 1/8
TM 80TM22.2 3 Three 3 208-220/460/575 46 8 3/8 22
TM 80TM23.7 3 Three 5 208-220/460/575 57 8 3/8 23 3/8
TMA 50TMA2.25 2 Three 1/3 230/460 16 9 5/8 14 15/16
TMA 50TMA2.25S 2 Single 1/3 115/230 17 9 5/8 14 15/16
TMA 50TMA2.4 2 Three 1/2 230/460 17 9 5/8 15 1/4
TMA 50TMA2.4S 2 Single 1/2 115/230 19 9 5/8 15 1/4
TMA 50TMA2.75(S) 2 Single 1 115/230 21 9 5/8 15 7/8
TMA 80TMA21.5 3 Three 2 208-220/440 34 7 11/16 24 1/2
TMA 80TMA22.2 3 Three 3 208-220/460/575 48 8 3/8 30 1/4
TMA 80TMA23.7 3 Three 5 208-220/460/575 59 8 3/8 31 1/2

Tsurumi Submersible Pumps GPN Series

Tsurumi Submersible GPN Series

Agitator Tsurumi Submersible Pump GPN Series pumps are ideal for slurry, quarry and gravel pit drainage. Abrasive resistant metals and slow tip speed offer long wear life. Water cooling jacket around the motor allows pump to remain cool even in low water pumping conditions.

GPN35.5

Tsurumi Submersible GPN Series Features

Discharge sizes from 3-6 inches and horsepower ranges from 7.5-30 hp.

4 pole, 1800 rpm motors.

Lower impeller tip speeds extend parts wear life 2-3 times.

Rugged cast iron construction.

Dual silicon carbide mechanical seals.

Internal Thermal motor protection and Tsurumi’s exclusive oil lifter.

Anti wicking cable entrance.

Hardened high chrome impeller and agitator.

Tsurumi Submersible Performance Range

 

GPN Series

 

Model Tsurumi Submersible Discharge Size (in.) Motor Output (HP) Pole Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
GPN35.5 3 7.5 4-1800 208/220/460/575 19 3/16 30 9/16 319
GPN411 4 15 4-1800 208/220/460/575 24 5/16 33 7/8 478
GPN415 2 22 4-1800 208/220/460/575 24 5/16 33 7/8 485
GPN622 6 30 4-1800 460/575 28 9/16 43 3/8 910

Tsurumi Submersible - PSF Series

Tsurumi Submersible PSF Series

The Tsurumi Submersible PSF pump features the highest head in this class. 304 Stainless-steel and composite resin materials are used in all wetted parts.

PSF Series

Tsurumi Submersible PSF Series Features

Watertight Cable Entrance with Anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous duty air filled copper wound highly efficient motor.

Tsurumi Submersible Corrosion Resistant Stainless Steel Motor Casing

Dual inside mechanical Tsurumi Submersible with Silicon Carbide vs. Ceramic bottom faces.

Tsurumi Submersible Ball type air Relief valve

Solids handling semi-vortex impeller

32Ft power cord

Available in Automatic Operation (PSFA) / Auto Alternating (PSFW)

Tsurumi Submersible Performance Range

 

PSF Series

 

Tsurumi Submersible Series Model Tsurumi Submersible Discharge Size (in.) Phase Motor Output (HP) Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
PSF 50PSF2.25 2 Three 1/3 230/460 9 5/8 14 15/16 16
PSF 50PSF2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 17
PSF 50PSF2.4 2 Three 1/2 230/460 9 5/8 15 1/4 18
PSF 50PSF2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 19
PSF 50PSF2.75 2 Three 1 230/460 9 5/8 15 7/8 21
PSF 50PSF2.75S 2 Single 115/230 9 5/8 15 7/8 15 7/8 24
PSF 80PSF21.5 3 Three 2 230/460 11 5/8 17 1/8 35
PSFA 50PSFA2.25 2 Three 1/3 230/460 9 5/8 14 15/16 17
PSFA 50PSFA2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 18
PSFA 50PSFA2.4 2 Three 1/2 230/460 9 5/8 15 1/4 19
PSFA 50PSFA2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 20
PSFA 50PSFA2.75 2 Three 1 230/460 9 5/8 15 7/8 23
PSFA 50PSFA2.75S 2 Single 1 115/230 9 5/8 15 7/8 25
PSFA 80PSFA21.5 3 Three 2 208-220/440 7 11/16 24 1/2 37
PSFW 50PSFW2.25 2 Three 1/3 230/460 9 5/8 14 15/16 17
PSFW 50PSFW2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 19
PSFW 50PSFW2.4 2 Three 1/2 230/460 9 5/8 15 1/4 19
PSFW 50PSFW2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 20
PSFW 50PSFW2.75 2 Three 1 230/460 9 5/8 15 7/8 23
PSFW 50PSFW2.75S 2 Single 1 115/230 9 5/8 15 7/8 25
PSFW 80PSFW21.5 3 Three 2 208-220/440 7 11/16 22 1/2 37

Tsurumi - UEF / UT Series

Tsurumi Pumps UEF/UT Series

The Tsurumi UEF pump features a vortex impeller and wide passage, making it ideal for pumping liquids containing fibrous foreign matter.  The UT pump is a compact economical cast iron pump, which has a large passage that makes it ideal for liquid containing various solids.

UEF Series

Tsurumi UEF/UT Series Features

UEF Series:

Vortex impeller

Built-in thermal protector

Air-filled motor rated for continuous duty

Ideal for tank transfer at small scale treatment facilities

Cast iron construction

Single-phase operation

Optional float switches available

Tsurumi UT Series:

Economical – the UT / UTZ Series is an economical version of the Tsurumi U Series, semi-vortex submersible pumps.  It is designed for a wide range ofapplications.

Large Diameter Passage – The pumo has a large passage that makes it ideal fr liquid containing various solids.

Available in Automatic Operation – Automatic version equipped wtih floats.  (50UTZ2.4S and 50UTZ2.75S)

Tsurumi Performance Range

 

UEF/UT Series

 

Model Tsurumi Discharge Size (in.) Phase Motor Output (HP) Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
50UEF2.4S 2 Single 1/2 115/220 9 1/2 13 33
50UT2.4S 2 Single 1/2 115/220 9 1/2 13 3/4 31
50UT2.75S 2 Single 1 115/220 9 1/2 16 37
50UTZ2.4S 2 Single 1/2 115/220 9 1/2 15 3/4 31
50UTZ2.75S 2 Single 1 115/220 9 1/2 18 37
Pages:« Prev123456Next »
You might also likeclose