Drainage Pumps

Ebara Pumps - Submersible cast iron submersible sewage pump

Submersible cast iron submersible sewage pump

Model DLU

The model DLU submersible pumps are constructed of rugged cast iron suitable for sewage and wastewater applications. Designed with semi-open impellers that have a large wear area and open passageways, the model DLU offers the best handling for stringy and/or abrasive materials.


Specifications

  • Discharge Size: 2″, 3″, 4″
  • Range of HP: 1 to 5 HP
  • Capacity: 13 to 430 GPM
  • Head: 9 to 66 Ft.
  • Max. liquid temperature: 104°F (40°C)
  • Max. solid diameter: 3″
  • Available in single or three phase models

Key Features

  • Air-filled Class F insulated heavy duty motor – operates cooler with higher efficiencies
  • Built-in motor protection autocut – protects against overheat, out of phase, single phasing and no load
  • 60,000 hour bearings – long dependable operation, lower maintenance costs
  • Large solids handling capabilities – prevents clogging
  • Semi-open impellers – best design for handling stringy and abrasive materials providing durability and longer life
  • Double mechanical seals – operate in an oil bath providing longer service life and lower maintenance costs
  • Stainless steel shaft – high tensile strength and corrosion resistance

Applications

  • Sewage
  • Water
  • Wastewater
  • Drainage (household, industrial)
  • Irrigation

Grundfos Submersible Drainage Pumps

Overview

DWK and DPK are grundfos submersible pumps designed for dewatering and drainage applications. The cast-iron construction and the hydraulic design contribute durability and high efficiency. The differences between the DWK and DPK Grundfos Submersible pump ranges lie in the discharge arrangement and the installation type. The DWK is designed with a top discharge pipe and suction strainer, and is thus more suitable for temporary installation, whereas the DPK has a side discharge and a ring-stand or auto coupling (as accessories), and is suitable for permanent installations.

Applications

DWK/DPK are excellent Grundfos Submersible pumps for dewatering and draining applications. The combination of compact design with high-pressure capability makes the pumps suitable for use in pits, whether for temporary or fixed installation. The installation design options provide the flexibility needed to cover many needs.

Grundfos Submersible Applications include:

  • Construction sites
  • Excavations
  • Tunnels
  • Fish ponds
  • Drainage pits.

 

Features and benefits

  • Durability
  • High efficiency
  • Installation flexibility
  • High-pressure capabilities, cost-effectiveness.

Tsurumi Submersible Pumps - TM series

TM Series By Tsurumi Submersible Pumps

Tsurumi Submersible Pumps corrosion resistant pumps are available in 316 or 304 stainless steel (SFQ Series and SQ Series) as well as titanium (TM Series). Featuring semi-vortex, vortex, and semi-open impellers, our solidly engineered pumps can endure the corrosive forces of your toughest applications Tsurumi Submersible Pumps.

Performance Range Of Tsurumi Submersible Pumps

TM Series

 

Tsurumi Submersible Pumps Series Model Tsurumi Submersible Pumps Discharge Bore (in.) Phase Motor Output (HP) Voltage (V) Shipping Weight (lbs.) Diameter (in.) Height (in.)
TM 50TM2.25 2 Three 1/3 230/460 15 9 5/8 14 15/16
TM 50TM2.25S 2 Single 1/3 115/230 16 9 5/8 14 15/16
TM 50TM2.4 2 Three 1/2 230/460 16 9 5/8 15 1/4
TM 50TM2.4S 2 Single 1/2 115/230 17 9 5/8 15 1/4
TM 50TM2.75(S) 2 Single 1 115/230 20 9 5/8 15 7/8
TM 80TM21.5 3 Three 2 208-220/440 33 7 11/16 17 1/8
TM 80TM22.2 3 Three 3 208-220/460/575 46 8 3/8 22
TM 80TM23.7 3 Three 5 208-220/460/575 57 8 3/8 23 3/8
TMA 50TMA2.25 2 Three 1/3 230/460 16 9 5/8 14 15/16
TMA 50TMA2.25S 2 Single 1/3 115/230 17 9 5/8 14 15/16
TMA 50TMA2.4 2 Three 1/2 230/460 17 9 5/8 15 1/4
TMA 50TMA2.4S 2 Single 1/2 115/230 19 9 5/8 15 1/4
TMA 50TMA2.75(S) 2 Single 1 115/230 21 9 5/8 15 7/8
TMA 80TMA21.5 3 Three 2 208-220/440 34 7 11/16 24 1/2
TMA 80TMA22.2 3 Three 3 208-220/460/575 48 8 3/8 30 1/4
TMA 80TMA23.7 3 Three 5 208-220/460/575 59 8 3/8 31 1/2

Tsurumi Pumps - SFQ Series

SFQ Series By Tsurumi Pumps

Tsurumi Pumps corrosion resistant pumps are available in 316 or 304 stainless steel (SFQ Series, SQ Series) as well as titanium (TM Series). Featuring semi-vortex, vortex, and semi-open impellers, our solidly engineered pumps can endure the corrosive forces of your toughest applications.

Performance Range Of Tsurumi Pumps

SFQ Series

 

Model Tsurumi Pumps Discharge Bore (in.) Phase Motor Output (HP) Pole Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
100SFQ211 4 Three 15 2-3600 440 25 33 1/4 315
100SFQ25.5 4 Three 7.5 2-3600 440 25 33 1/4 273
100SFQ27.5 4 Three 10 2-3600 440 23 3/8 31 3/8 271
50SFQ2.75 2 Three 1 2-3600 440 9 15/16 15 5/8 49
80SFQ21.5 3 Three 2 2-3600 208/230/460/575 12 15/16 17 1/8
80SFQ23.7 3 Three 5 2-3600 208/230/460/575 14 1/8 21 3/4

Tsurumi Submersible Pumps - NK Series

NK Series, Tsurumi Submersible Pumps

Heavy duty, high head single-phase pumps available in 110v or 220v. Optional agitator kits allow continuous duty when pumping abrasive materials.

NK2-15

Tsurumi Submersible Pumps – NK Series Features

Synthetic Rubber Wear Parts for maximum durability and pump performance.

Continuous duty air-filled motor

Ductible iron semi-vortex impeller

Dual voltage available on NK2-15 model

OPTIONAL ACCESSORIES
TS-303 Float Switch for
automatic operation (220V only).

Agitator kit to suspend solids and
prevent clogging.

2-inch NPT coupling available.

NK2-22L

Tsurumi Submersible Pumps – NK Series Features

Tsurumi Submersible Pumps NK2-22L Features:

New high volume NK2-22L series pump produces 35% more volume than our standard NK2-22 series. Available in 220v single-phase only.

Performance Range Of Tsurumi Submersible Pumps

NK Series

 

Model Discharge Size (in.) Motor Output (HP) Voltage (V) Cable Length (ft.) Diameter (in.) Height (in.) Weight (lbs.)
NK2-15 3 2 110 or 220 32 9 7/16 24 1/2 63.5
NK2-22 3 3 220 32 9 7/16 24 1/2 64
NK2-22L 3 3 220 32 9 1/4 26 1/2 88

Tsurumi Pumps - LHW Series

Tsurumi Pumps Submersible LHW Series

Tsurumi Pumps LHW series achieves extremely high head capabilities. Our dual staged enclosed impellers are just one of many features found engineered into these durable tsurumi pumps which can help you solve all your long distance water transfer needs.

LH23.0W

Tsurumi Pumps LHW Series Features

Discharge sizes from 2-4 inches and horsepower range from 4-40 hp

Replaceable and adjustable high chrome wear rings provide increased wear resistance.

Built in thermal and amperage protectors prevent motor failure in run-dry or surge conditions.

High pressure dual silicon carbide mechanical seals operate in a separate oil chamber and are capable of withstanding operating depths of 328 feet.

Seal pressure relief ports provide a flow path above the pump casing and allow water release from the pump and away from the shaft. This protects the mechanical seals from excessive pumping pressure or water hammer in high head pumping applications.

Anti-wicking cable entrance and Tsurumi’s exclusive oil lifter for added protection.

Performance Range Of Tsurumi Pumps

LHW Series

 

Model Discharge Bore (in.) Motor Output (HP) Shipping Weight (lbs.) Cable Length (ft.) Voltage (V) Weight (lbs.) Diameter (in.) Height (in.)
LH23.0W 2 4 Consult Factory 50 208-230/460/575 101 7-5/16 24-13/16
LH311W 3 15 N/A 50 208/230/460/575 286 10-5/8 40-5/16
LH322W 3 30 N/A 50 208/230/460/575 670 13 48-5/8
LH33.0 3 4 Consult Factory 50 208-230/460/575 93 7-5/16 25-3/8
LH430W 4 40 N/A 50 208/230/460/575 714 14-3/8 54-1/8

Ebara Pumps FSSA Series

FSSA Series

Features Of Ebara Pumps

  • Ebara Pumps portion contacting liquid is made of high grade stainless steel.
  • BPO (Back Pull Out) feature allows all rotating elements to be removed without disconnecting suction and discharge pipework.
  • Top centerline dicharge, foot support under casing for maximum resistance to misalignment and distortion from pipe loads.
  • Non-overload design to ensure stable performances for all application
  • Compact construction, aplicable for two-poles high speed motor provides a compact unit and minimizes installation area.
  • Wide range application due to 316 stainless steel material.

Applications Of Ebara Pumps

  • Industrial use
  • Chemical solutions
  • Industrial drainage
  • Hot and cold water supply
  • Sea water

Material Of Ebara Pumps

  • Casing SCS-14 Stainless steel, Impeller SCS-14 Stainless steel, Shaft 316 Stainless steel, Casing O-ring Fluolorubber (viton); optional Teflon (PTFE), Seal Teflon (PTFE); optional Mechacnical seal SiC/SiC.

 

Submersible stainless steel pump - Ebara Pump

Ebara Pump Submersible stainless steel pump, effluent

Model DWU – “Dominator”

The EBARA Pump Model DWU “Dominator” sewage pumps are designed for reliable pumping of wastewater with suspended solids up to 2″ in diameter. The EBARA Pump Dominator is superior in dependability and efficiency. High-quality stainless steel components are stronger, dimensionally consistent and lighter weight compared to conventional cast iron parts. Stainless steel construction is ideal for residential, commercial and industrial applications. Double mechanical seals are a standard feature that ensure long life.

Model Ebara Pump DW(A)(F)U, DWX(A)(F)U is CSA certified (3HP excluded).


Specifications Ebara Pump

  • Discharge Size: 2″ (NPT or ANSI Flanged)
  • Range of HP: 1/2 to 3 HP
  • Capacity: 8 to 235 GPM
  • Head: 8 to 74 Ft.
  • Max. liquid temperature: 104°F (40°C)
  • Max. solid diameter: 2″
  • Available in single or three phase models; manual or automatic operation

Key Features Ebara Pump

  • Constructed of high-quality, corrosion resistant 304 stainless steel
  • Motor is 2 pole submersible, rated continuous duty
  • 104°F maximum fluid temperature continuous operation, fully submerged; 140° F intermittent operation
  • Automatic float switch
  • NPT thread discharge or 150 lb ANSI flange
  • Double mechanical seal with viton elastomers
  • Shielded, pre-lubricated ball bearings
  • Single channel and vortex impellers
  • Thermal overload protection
  • QDC system available as an optional accessory

Ebara Pump Applications

  • Wastewater with suspended solids
  • Residential
  • Commercial
  • Industrial
  • Fountains, water displays
  • Containment transfer
  • Irrigation
  • Drainage
  • Emptying (pools, water storage structures)

Grundfos Pumps - SE Series

Grundfos Pumps - SE Series-SEV and SE1 SeriesGrundfos Pumps Overview

The Grundfos Pumps SEV and SE1 pumps are designed for handling wastewater, process water and unscreened raw sewage in heavy-duty municipal, utility, and industrial applications.

These two technologically very advanced series of pumps are available with efficient single-channel or SuperVortex impellers allowing for free passage of solids up to 100 mm in size. This greatly reduces the risk of clogging, and ensures maximum up-time and low operating costs.

The SEV and SE1 pumps can be permanently installed by means of an auto-coupling system or with a fixed pipe connection, submerged or dry, without separate motor cooling arrangements. The pumps are also suitable for free-standing installation, or as portable utility pumps.

 

 

Grundfos Pumps Applications

The SE Grundfos pumps are designed to optimise the operation of a system. Reliability, simple maintenance, and complete system compatibility are some of the main advantages.

Features and benefits Grundfos Pumps

  • Cable plug connection
  • Unique clamp connection
  • Single-channel and vortex impellers
  • Solids passage up to 100 mm
  • Unique cartridge shaft seal
  • Modular design
  • Minimum downtime
  • Motor based on premium efficiency components
  • Unique liquid-less motor cooling system
  • Many sensor options.

Ebara Pumps - SZ Series

Features Ebara Pumps

 

  • High efficiency.
  • Low cost operation.
  • Economics.
  • Non clogging.
  • Easy maintenance.

 

 

Applications Ebara Pumps

 

  • Irrigation
  • Industrial use
  • Drainage
  • Shrimp eathern
  • Flooding

 

 

Specifications Ebara Pumps

 

  • Type Horizontal shaft mixed flow volute pump
  • Impeller mixed flow open type
  • Rotation counter clockwise when viewed from end shaft coupling
  • Ball bearing (sealed ball bearing or oil bath type)
  • JIS 10 Kg/Cm2 (Thick Type)
  • Noozle Position Standard 200-250; Side suction – Top discharge, Standard 300-500; Side suction – Side discharge; Optional 300-350; Side suction – Top discharge
  • Liquid river water, fresh water
  • Temperature liquid below 80o C

 


Pages:12Next »
You might also likeclose